6012P-8




 
Key Features
1. Dual Intel® Xeon™ Support up to 3.0 GHz
2. Up to 8GB DDR 266/200 SDRAM
3. 1 x 64-bit 133/100MHz Full-height, Full-length PCI-X Expansion Slot
4. 1 x 64-bit 66MHz Low-profile PCI-X Expansion Slot
5. 2 x Intel® 82546EB Gigabit Ethernet Ports
7. 3 x 1" Ultra320 SCSI Hot-Swap Drive Bays
8. 400W Power Supply

 
 


 
 
Motherboard
 

Super X5DPR-TG2+
 
 
Processor/Cache
 
CPU   • Dual mPGA604 ZIF Sockets
• Supports up to two Intel® Xeon™ processor(s) with 1MB integrated Advanced Transfer Cache up to 3.20GHz
 
System Bus   533MHz/400MHz system bus
 
 
System Memory
 
Memory Capacity   • Six 184-pin DIMM sockets
• Supports up to 12 GB DDR266/200 memory
• Dual channel memory bus
• Memory must be populated in pairs
 
Memory Type   DDR266/200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
 
DIMM Sizes   256 MB, 512 MB, 1 GB, 2 GB
 
Memory Voltage   2.5 V only
 
 
On-Board Devices
 
Chipset   • Intel® E7501 chipset
• MCH + ICH3-S + P64H2
 
IPMI   Support for Intelligent Platform Management Interface v.1.5 (Optional)
 
Serial ATA   • Dual Silicon 3112A controllers
• Four Serial ATA ports
• RAID 0, 1 Supported
 
RAID   Support for ZeroChannel RAID ZCR Card (Card NOT included)
 
Network Controllers   • Dual Port Intel® 82546EB Gigabit Ethernet
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
 
Graphics   ATI Rage XL SVGA PCI video controller with 8 MB of video memory
 
 
Expansion Slots
 
• 1x full-height, full-length 64-bit 133/100MHz PCI-X (3.3V) expansion slot (with Riser Card) w/ VXB (Virtual Extended Bus) slot
• 1x low-profile slim 64-bit 66MHz PCI-X (3.3V) expansion slot (with Riser Card)
 
 
Input / Output
 
IDE   • Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100
 
USB   2x USB ports
 
Serial Ports   1x Fast UART 16550 serial ports
 
Floppy   1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
 
Keyboard / Mouse   PS/2 keyboard and mouse ports
 
 
System BIOS
 
BIOS Type   4Mb Flash EEPROM with Phoenix® BIOS
 
BIOS Features   • Plug and Play (PnP)
• SMBIOS 2.3
• APM 1.2
• DMI 2.1
• ACPI 1.0
• BIOS rescue hot keys
• Hardware BIOS virus protection
 
 
 
Chassis
 
Form Factor   1U Rackmount
 
Model   SC813T-500
 
 
Dimensions
 
Height   1.7" (43mm)
 
Width   17.2" (438mm)
 
Depth   25.6" (650mm)
 
Gross Weight   42 lbs (19.1 kg)
 
Available Colors   Beige, Black
 
 
Front Panel
 
Buttons   • Power On/Off button
• System Reset button
 
LEDs   • Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
 
Ports   none
 
 
Drive Bays
 
Hot-swap   4x 1" SATA Hot-swap drive bays
 
 
Peripheral Drives
 
Floppy   TEAC 3.5" 1.44MB Slim Floppy Drive
 
CD-ROM   TEAC Slim 24x CD-ROM drive
 
 
SATA Backplane
 
1x 1U Serial ATA backplane
 
 
System Cooling
 
Fans   2x 10cm blower fans
 
 
Power Supply
 
Cold-swappable 500W AC power supply module w/ PFC
[ 20-pin, (8-pin=12V) ]
 
AC Voltage   • 100 - 240V, 60-50Hz, 10 Amp
 
DC Output   • 5V + 3.3V ≤ 160W
 
+5V   30.0 amp
 
+5V standby   2.0 amp
 
+12V   39.0amp
 
-12V   1.0 amp
 
+3.3V   21.0 amp
 
 
PC Health Monitoring
 
CPU   • Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, 3.3V Standby
• CPU Core 3-Phase-switching voltage regulator with auto-sense from 1.3V-1.5V
• Adjustable CPU clock frequency ratio settings (via BIOS)
 
FAN   • Total of four 3-pin fan headers
• 3x fans with tachometer monitoring
• Overheat backup fan connector
• Status monitor with firmware/software on/off control
 
Temperature   • Monitoring for CPU, chassis, environment
• CPU thermal trip support
 
LED   • CPU Overheat LED
• System Overheat LED
• Suspend-state indicator LED
 
Other Features   • Chassis intrusion detection
• Chassis intrusion header
• Chipkill support