5013G-T


 
Key Features
1. Intel® Pentium® D, Pentium® 4 Extreme
    Edition, Pentium 4, Pentium Extreme
    Edition, & Celeron D in LGA775
    Package(FSB 1066/800/533)
2. Up to 8GB dual channel unbuffered,
    ECC DDRII 667/533/400 SDRAM
3. 1 (x16) & 1 (x1) PCI-Express
    2x 64-bit 133MHz PCI-X
    3x 32-bit 33MHz PCI
4. 1x Intel® 82573V (Tekoa) PCI-e Gigabit
    LAN Port and 8x USB 2.0 ports
5. 4 x Hot-swappable SATA Hard
    Drive Bays
6. 450W Power Supply

 


Motherboard

Super PDSGE
 
Processor/Cache
CPU
  • Single LGA775 ZIF Socket
  • Supports an Intel® Pentium® D (Dual Core) processor
  • Supports an Intel® Pentium® Extreme Edition processor
  • Supports an Intel® Pentium® 4 processor
  • Supports an Intel® Pentium® 4 Extreme Edition processor
  • Supports an Intel® Celeron® D processor
  • Hyper-Threading (HT) capable
System Bus
  • 1066 / 800 / 533 MHz system bus
 
System Memory
Memory Capacity
  • Four 240-pin DIMM sockets
  • Supports up to 8 GB of unbuffered, ECC DDRII 667/533/400MHz memory (Single / Dual Channel)
Memory Type
  • DDRII 667/533/400MHz unbuffered, ECC SDRAM, 240-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1 GB, 2GB
Memory Voltage
  • 1.8 V only
 
On-Board Devices
Chipset
  • Intel 955X (Glenwood)
  • ICH7R + PXH-V + Intel® 82573V
Serial ATA
  • Intel® ICH7R SATA (3 Gbps) controller built-in
  • Host RAID 0, 1, 5, and 10 Support
Network Controllers
  • Single-port Intel® 82573V Gigabit PCI-Express Ethernet (Tekoa)
  • Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
Audio
  • AC'97 audio CODEC with high quality 6-channel sound
Super I/O
  • Winbond 83627EHF chip
 
Expansion Slots
PCI-Express
  • 1 (x16) slot
  • 1 (x1) slot
PCI-X
  • 2x 64-bit 133MHz PCI-X (3.3V) slot
PCI
  • 3x 32-bit 33MHz PCI (5V) slot
 
Input / Output
Serial ATA
  • Four Serial ATA ports ( 3Gbps performance)
  • Four SATA hard drives supported
IDE
  • One EIDE channel supports up to two UDMA IDE devices
  • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy
  • 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
LAN
  • 1x RJ45 LAN port
USB
  • 8x USB 2.0 compliant / 1.1 compatible (6x ports + 2x headers)
  • 2 in front (FUCI), 6 in rear
Audio
  • 1x Line In / Line Out / Microphone ports
  • Front Panel Header
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1x Fast UART 16550 serial port
  • 1x Serial Header
Parallel Port
  • 1x ECP/EEP Parallel Port
 
System BIOS
BIOS Type
  • 8Mb Flash EEPROM with AwardBIOS®
BIOS Features
  • User Over-Clock in System BIOS
  • Plug and Play (PnP)
  • APM 1.2
  • DMI 2.3 support
  • PCI 2.2
  • ACPI 1.0
  • BIOS rescue hot keys
  • USB Keyboard support
 
Chassis
Form Factor Mid-Tower
Model SC733T-450
 
Physical Features
Height
  • 16.8" (427mm)
Width
  • 7" (178mm)
Depth
  • 20.9" (531mm)
Weight
  • 39 lbs (17.7kg)
Available Colors
  • Beige, Black
 
Front Panel
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • Network activity LED
  • System Overheat LED
Ports
  • 2x Front side USB ports (USB 2.0 ready)
 
Drive Bays
Hot-swap
  • 4x 1" Serial ATA hot-swap drive bays
Peripheral Bay
  • 2x 5.25" peripheral drive bay
  • 1x 3.5" bay for floppy drive
 
Peripheral Drives
Floppy
  • TEAC 3.5" 1.44MB Floppy Drive
 
System Cooling
Fans
  • 1x 12cm rear exhaust fan
  • 1x 9cm mounted thermal cooling fan
  • 2x 8cm fans (450W power supply configuration)
 
SATA Backplane
4 x 1" SATA Backplane
 
Power Supply
450W low-noise AC power supply with redundant cooling feature (with PFC)
AC Voltage
  • 100 - 240V, 50/60Hz, 10 Amp
DC Output
  • 5V + 3.3V ≤ 160W
  • 12V1 + 12V2 + 12V3 ≤ 34 Amp
+5V
  • 26 Amp
+5V standby
  • 2 Amp
+12V1
  • 15 Amp
+12V2
  • 15 Amp
+12V3
  • 18 Amp
-12V
  • 1 Amp
+3.3V
  • 30 Amp
 
PC Health Monitoring
CPU
  • Monitors for CPU Cores, +1.5V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT
  • CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
  • Adjustable CPU clock frequency ratio settings (via BIOS)
FAN
  • Total of five 4-pin fan headers
  • 5x fans with tachometer monitoring
  • Status monitor with firmware / software speed control
  • Support 4-pin PWM fan (with speed control)
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Monitor (TM2) Support
LED
  • CPU / System Overheat LED
  • +5V standby alert LED
  • Suspend-state indicator LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • Lead Free (not 100%)