 |
 |
| CPU |
|
• Single mPGA478 ZIF Sockets
• Supports an Intel® Pentium® 4 processor with 2MB of integrated Advanced Transfer Cache up to 3.4GHz (Extreme Edition)
• Supports an Intel® Celeron® processor with 128KB of integrated Advanced Transfer Cache up to 2.8GHz
• Hyper-threading enabled
• 90 nano & 0.13 micron technology |
 |
| System Bus |
|
800 / 533 / 400MHz system bus |
|
|
|
| Memory Capacity |
|
• Four 184-pin DIMM sockets
• Supports up to 4 GB of DDR400/333/266 memory
• Dual channel memory bus
• Memory must be populated in pairs |
|
| Memory Type |
|
DDR400/333/266 unbuffered ECC or non-ECC SDRAM, 184-pin gold-plated DIMMs |
|
| DIMM Sizes |
|
128MB, 256 MB, 512 MB, 1 GB |
|
| Memory Voltage |
|
2.5 V only |
|
|
|
| Chipset |
|
• Intel® 875P chipset
• MCH + 6300ESB + FWH |
|
| Serial ATA |
|
• SATA Controller on-chip (Intel® 6300ESB)
(2x Drive support)
• Marvell® SATA Controller chip
(4x Drive support)
• Six Serial ATA ports
• RAID 0, 1 Supported |
|
| Network Controllers |
|
• 1x Intel® 82547GI CSA Gigabit Ethernet Controller
• 1x Intel® 82541 Gigabit Ethernet Controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
|
| Graphics |
|
ATI Rage XL SVGA PCI video controller with 8MB of video memory |
|
|
|
| AGP |
|
• 8x AGP Pro 1.5V |
|
| PCI Expansion |
|
• 3x 64-bit 66MHz PCI-X (3.3V) slots
• 2x 32-bit 33MHz PCI (5V) slots |
|
| IDE |
|
• Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
|
| Floppy |
|
1x Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
|
| USB |
|
• 2x USB 2.0 / 1.1 ports
• 1x USB header supports additional 2x USB 2.0 / 1.1 ports) |
|
| Serial Ports |
|
2x Fast UART 16550 serial ports |
|
| VGA Port |
|
1x VGA Port |
|
| Parallel Port |
|
1x ECP/EEP Parallel Port |
|
| LAN Port |
|
2x RJ45 Ports |
|
| Keyboard / Mouse |
|
PS/2 keyboard and mouse ports |
|
|
|
| BIOS Type |
|
4Mb Flash EEPROM with AwardBIOS® |
|
| BIOS Features |
|
• Plug and Play (PnP)
• APM 1.2
• DMI 2.3 support
• PCI 2.3
• ACPI 1.0
• BIOS rescue hot keys
• Hardware BIOS virus protection
• USB Keyboard support |
|
|
|
|
|
| Form Factor |
|
• Mid-Tower |
|
| Model |
|
SC733T-350 |
|
|
|
| Height |
|
7" (178mm) |
|
| Width |
|
16.69" (424mm) |
|
| Depth |
|
22" (559mm) |
|
| Weight |
|
- |
|
| Available Colors |
|
Beige, Black |
|
|
|
| Buttons |
|
• Power On/Off button
• System Reset button |
|
| LEDs |
|
• Power LED
• Hard drive activity LED
• Network activity LED
• System Overheat LED |
|
| Ports |
|
2x Front side USB ports (2.0 ready) |
|
|
|
| Hot-swap |
|
4x 1" SATA hot-swap drive bays |
|
| Peripheral Bay |
|
• 2x 5.25" full-height peripheral bay
• 1x 3.5" full-height peripheral bay |
|
|
|
| Fans |
|
• 1x 12cm exhaust thermal fan
• 1x 9cm mounted thermal cooling fan |
|
| |
|
| Thermal control 350W AC power supply w/ low noise cooling fan (w/ PFC) |
|
| AC Voltage |
|
• 100 - 240V, 50/60Hz, 3-6 Amp |
|
| DC Output |
|
• 5V + 3.3V ≤ 166W |
|
| +5V |
|
20 amp |
|
| +5V standby |
|
2 amp |
|
| +12V |
|
24amp |
|
| -12V |
|
0.5 amp |
|
| +3.3V |
|
25 amp |
|
|
|
| CPU |
|
• Monitors for CPU Cores, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT
• CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 0.85V-1.65V
• Adjustable CPU clock frequency ratio settings (via BIOS) |
|
| FAN |
|
• Total of five 3-pin fan headers
• 3x fans with tachometer monitoring
• Status monitor with firmware/software on/off control |
|
| Temperature |
|
• Monitoring for CPU, chassis, environment
• CPU thermal trip support |
|
| LED |
|
• CPU Overheat LED
• System Overheat LED
• +5V standby alert LED
• Suspend-state indicator LED |
|
| Other Features |
|
• Chassis intrusion detection
• Chassis intrusion header |
|
|
