5014P-8 |
|
|
Key Features
1. Intel® Pentium® D, Pentium® 4
Extreme Edition, Pentium 4, Pentium
Extreme Edition & Celeron D
in LGA775 Package(FSB 1066/800/533)
2. Up to 8GB unbuffered,
ECC DDRII 667/533/400 SDRAM
3. • 1 (x4) PCI-Express Slot OR
1x 64-bit 133MHz PCI-X Slot,
• 1x 64-bit 100MHz PCI-X Slot (low-
profile),
• 1x IPMI Slot
4. 2x Intel® 82573V (Tekoa) PCI-e Gigabit
LAN Ports
5. Zero Channel RAID Support
6. 4 x 1" Ultra320 SCSI Hot-swap
Drive Bays
7. 400W Cold-swap Power Supply with
I2C for Remote Management
|
|
|
|
|
|
| |
|
|
| |
| |
| CPU |
- Single LGA775 ZIF Socket
- Supports an Intel® Pentium® D (Smithfield Dual Core) processor
- Supports an Intel® Pentium® Extreme Edition processor
- Supports an Intel® Pentium® 4 processor
- Supports an Intel® Pentium® 4 Extreme Edition processor
- Supports an Intel® Celeron® D processor
- Hyper-Threading (HT) capable
|
| System Bus |
- 1066 / 800 / 533 MHz system bus
|
| |
| |
| Memory Capacity |
- Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered, ECC DDRII 667/533/400MHz memory (Single / Dual Channel)
|
| Memory Type |
- DDRII 667/533/400MHz unbuffered, ECC SDRAM, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2GB
|
| Memory Voltage |
|
| |
| |
| Chipset |
- Intel E7230 (Mukilteo) Smithfield chipset
- ICH7R + PXH + Intel® 82573V
|
| SCSI |
- Adaptec AIC-7902
- Host RAID (0, 1, 10)
|
| SCSI ZCR |
- Support for Supermicro All-In-One ZCR Card: AOC-LPZCR1 or
- Support for Zero-Channel RAID with Adaptec 2010S / 2020S ZCR Card
- (Card NOT included)
|
| IPMI |
- 1U support for Intelligent Platform Management Interface v.2.0 (Optional: 1UIPMI-B)
- 3rd LAN
(Optional: AOC-1UIPMI-LANG)
|
| Network Controllers |
- Dual-port Intel® 82573V Gigabit PCI-Express Ethernet (Tekoa)
- Supports 1000BASE-TX, RJ45 output
|
| VGA |
- On-board ATI RageXL graphics, 8MB
|
| Super I/O |
|
| |
| |
| PCI-Express / PCI-X |
- 1 x Universal (SXB-E) slot for
[1 (x4) PCI-E Slot] OR
[1x 64-bit PCI-X 133MHz slot]
- 1 x 64-bit PCI-X 100MHz slot (ZCR Support)
- 1 x 1U IPMI Slot
|
| |
| |
| SCSI |
- 2x Ultra 320 Single Channel SCSI Connectors
|
| IDE |
- One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
|
| LAN |
|
| USB |
- 2x USB 2.0 compliant / 1.1 compatible Rear Ports
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 1x Fast UART 16550 serial port
- 1x serial header
|
|
|
| |
| |
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
| |
| Buttons |
- Power On/Off button
- UID button
|
| LEDs |
- Power / Power Fail LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
- UID LED
|
| Ports |
|
| |
| |
| Hot-swap |
- 4x 1" Hot-swap Ultra320/160 SCSI drive bays
|
| |
| |
| Floppy |
- TEAC 3.5" 1.44MB Slim Floppy Drive
|
| DVD-ROM |
- Panasonic Slim 8x DVD-ROM drive
|
| |
| |
| 1x SCA814S 1U SCSI Backplane w/ SAF-TE |
| |
| |
| Fans |
- 5x 4cm 12,000 RPM Nidec dual blade fans
|
| |
| |
| 400W AC power supply with PFC |
| AC Voltage |
- 100 - 240V, 50-60Hz, 6A-3A Amp
|
| +5V |
|
| +5V standby |
|
| +12V |
|
| -12V |
|
| +3.3V |
|
| |
| |
| CPU |
- Monitors for CPU Cores (+3.3V, +5, ±12V, +5V Standby)
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
|
| FAN |
- Fan Speed Control
- Total of four proprietary fan headers
- 4 fans with tachometer monitoring
- Status monitor with firmware / software speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor (TM2) Support
|
| LED |
- CPU / System Overheat LED
- +5V standby alert LED
- Suspend-state indicator LED
|
| Other Features |
- Chassis Intrusion Detection
- Chassis Intrusion Header
|
| |
| |
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0
- Hardware BIOS Virus protection
- USB Keyboard support
|
|
|
|
 |
|
