5015M-MR


 
Key Features
1. Intel® Pentium® D, Pentium® 4
    Extreme Edition, Pentium 4, Pentium
    Extreme Edition & Celeron D
    in LGA775 Package(FSB 1066/800/533)
2. Up to 8GB unbuffered,
    ECC DDRII 667/533 SDRAM
3. • 1 (x8) PCI-Express OR
    • 1x 64-bit 133MHz PCI-X Slot
4. 2x Intel® 82573V (Tekoa) PCI-e Gigabit
    LAN Ports
5. ATI RageXL Graphics
6. 1x 3.5" Internal Drive Bay
7. 260W Power Supply

 




 


     
 
Motherboard
 

Super PDSMi
 
Processor/Cache
 
CPU
  • Single LGA775 ZIF Socket
  • Supports an Intel® Pentium® D (Smithfield Dual Core) processor
  • Supports an Intel® Pentium® Extreme Edition processor
  • Supports an Intel® Pentium® 4 processor
  • Supports an Intel® Pentium® 4 Extreme Edition processor
  • Supports an Intel® Celeron® D processor
  • Hyper-Threading (HT) capable
  • 2MB / 1MB L2 Cache
System Bus
  • 1066 / 800 / 533 MHz system bus
 
System Memory
 
Memory Capacity
  • Four 240-pin DIMM sockets
  • Supports up to 8 GB of unbuffered, ECC DDRII 667/533MHz memory (Dual Channel)
Memory Type
  • DDRII 667/533MHz unbuffered, ECC SDRAM, 240-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1 GB, 2GB
Memory Voltage
  • 1.8 V only
 
On-Board Devices
 
Chipset
  • Intel E7230 (Mukilteo) Smithfield chipset
  • ICH7R + PXH-V + Intel® 82573V
Serial ATA
  • Intel® ICH7R SATA controller built-in
  • RAID 0, 1, 5, 10
IPMI
  • 1U support for Intelligent Platform Management Interface v.2.0 (Optional: AOC-IPMI20-E )
Network Controllers
  • Dual-port Intel® 82573V Gigabit PCI-Express Ethernet (Tekoa)
  • Supports 10Base-T, 100Base-TX, 1000BASE-TX, RJ45 output
VGA
  • On-board ATI RageXL graphics, 8MB
Super I/O
  • Winbond 83627EHF chip
Clock Generator
  • CK410
 
Expansion Slots
 
PCI-Express / PCI-X
  • 1x Universal (SXB-E) Slot for Riser (x1)
     [ 1x 64-bit PCI-X 133MHz Slot ] OR
     [ 1 (x8) PCI-Express Slot ] (Optional)
 
Input / Output
 
Serial ATA
  • Four Serial ATA ports (3 Gbps performance)
  • Four SATA hard drives supported
IDE
  • One EIDE channel supports up to two UDMA IDE devices
  • IDE Master / Slave 2 ports
  • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
  • White Connector for Compact Flash (CF) card only
Floppy
  • 1 Floppy controller; 1.44 MB
LAN
  • 2x RJ45 LAN port
USB
  • USB 2.0 compliant / 1.1 compatible
  • 2x Front USB ports
  • 2x rear ports
VGA
  • 1x VGA Port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1x Fast UART 16550 serial port
  • 1x Header
Parallel Port
  • 1x ECP / EEP Parallel Header
 
 
Chassis
 
Form Factor
  • 1U Rackmount
Model
  • SC512F-260
    (For SuperServers Only)
 
Dimensions
 
Height
  • 1.7" (43mm)
Width
  • 16.8" (427mm)
Depth
  • 14.0" (356mm)
Gross Weight
  • 17 lbs (7.7kg)
Available Colors
  • Beige, Black
 
Front Panel
 
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
Ports
  • 2x USB Ports (2.0 Ready)
 
Drive Bays
 
Internal Bay
  • 1x 3.5" internal SATA drive bay
 
Peripheral Drives
 
CD-ROM
  • TEAC Slim 24x CD-ROM drive
 
System Cooling
 
Fans
  • 2x 16cm 3-pin Nidec Counter-rotating Fans
 
Power Supply
 
Thermal control 260W AC power supply with PFC
[ 24-pin, (4-pin=12V) ]
AC Voltage
  • 100 - 240V, 60-50Hz, 5-3 Amp
DC Output
  • 5V + 3.3V ≤ 140W
+5V
  • 25.0 amp
+5V standby
  • 2.0 amp
+12V
  • 18.0 amp
-12V
  • 1.0 amp
+3.3V
  • 15.0 amp
 
PC Health Monitoring
 
CPU
  • Monitors for CPU Cores (+1.8V, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT)
  • CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
  • Adjustable CPU clock frequency ratio
FAN
  • Fan Speed Control
  • Fans with tachometer monitoring
  • Status monitor with firmware speed control
  • Low noise fan speed control
  • Status monitor for on/off control
  • Support 3-pin fans (without speed control)
  • Pulse Width Modulated (PWM) fan connector
Temperature
  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
LED
  • +5V Standby Alert LED
  • Suspend-state indicator LED
Other Features
  • Chassis Intrusion Detection
 
System BIOS
 
BIOS Type
  • 8Mb Flash EEPROM with Phoenix BIOS®
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • DMI 2.3 support
  • PCI 2.2
  • ACPI 1.0
  • USB Keyboard support