5015M-MF

Key Features

1. Intel® Pentium® D, Pentium® 4
    Extreme Edition, Pentium 4, Pentium
    Extreme Edition & Celeron D
    in LGA775 Package(FSB 1066/800/533)

2. Up to 8GB unbuffered,
ECC DDRII 667/533 SDRAM

3. • 1 (x8) PCI-Express OR
• 1x 64-bit 133MHz PCI-X Slot

4. 2x Intel® 82573V (Tekoa) PCI-e Gigabit
LAN Ports

5. ATI RageXL Graphics

6. 1x 3.5" Internal Drive Bay

7. 260W Power Supply


Processor/Cache

CPU	Single LGA775 ZIF Socket Supports an Intel® Pentium® D (Smithfield Dual Core) processor Supports an Intel® Pentium® Extreme Edition processor Supports an Intel® Pentium® 4 processor Supports an Intel® Pentium® 4 Extreme Edition processor Supports an Intel® Celeron® D processor Hyper-Threading (HT) capable 2MB / 1MB L2 Cache
System Bus	1066 / 800 / 533 MHz system bus


System Memory

Memory Capacity	Four 240-pin DIMM sockets Supports up to 8 GB of unbuffered, ECC DDRII 667/533MHz memory (Dual Channel)
Memory Type	DDRII 667/533MHz unbuffered, ECC SDRAM, 240-pin gold-plated DIMMs
DIMM Sizes	256 MB, 512 MB, 1 GB, 2GB
Memory Voltage	1.8 V only


On-Board Devices

Chipset	Intel E7230 (Mukilteo) Smithfield chipset ICH7R + PXH-V + Intel® 82573V
Serial ATA	Intel® ICH7R SATA controller built-in RAID 0, 1, 5, 10
IPMI	1U support for Intelligent Platform Management Interface v.2.0 (Optional: AOC-IPMI20-E )
Network Controllers	Dual-port Intel® 82573V Gigabit PCI-Express Ethernet (Tekoa) Supports 10Base-T, 100Base-TX, 1000BASE-TX, RJ45 output
VGA	On-board ATI RageXL graphics, 8MB
Super I/O	Winbond 83627EHF chip
Clock Generator	CK410


Expansion Slots

PCI-Express / PCI-X	1x Universal (SXB-E) Slot for Riser (x1) [ 1x 64-bit PCI-X 133MHz Slot ] OR [ 1 (x8) PCI-Express Slot ] (Optional)
PCI	1x 32-bit 33MHz PCI (5V) slot


Input / Output

Serial ATA	Four Serial ATA ports (3 Gbps performance) Four SATA hard drives supported
IDE	One EIDE channel supports up to two UDMA IDE devices IDE Master / Slave 2 ports Supports UDMA Mode 5, PIO Mode 4, and ATA/100 White Connector for Compact Flash (CF) card only
Floppy	1 Floppy controller; 1.44 MB
LAN	2x RJ45 LAN port
USB	USB 2.0 compliant / 1.1 compatible 2x front USB ports 2x rear ports
VGA	1x VGA Port
Keyboard / Mouse	PS/2 keyboard and mouse ports
Serial Ports	1x Fast UART 16550 serial port 1x Header
Parallel Port	1x ECP / EEP Parallel Header


Front Panel

Buttons	Power On/Off button System Reset button
LEDs	Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED
Ports	2x USB Ports (2.0 Ready)


System Cooling

Fans	2x 16cm 3-pin Nidec Counter-rotating Fans


Power Supply

Thermal control 260W AC power supply with PFC [ 24-pin, (4-pin=12V) ]
AC Voltage	100 - 240V, 60-50Hz, 5-3 Amp
DC Output	5V + 3.3V ≤ 140W
+5V	25.0 amp
+5V standby	2.0 amp
+12V	18.0 amp
-12V	1.0 amp
+3.3V	15.0 amp


PC Health Monitoring

CPU	Monitors for CPU Cores (+1.8V, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT) CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V Adjustable CPU clock frequency ratio
FAN	Fan Speed Control Total of five proprietary fan headers 5 fans with tachometer monitoring Status monitor with firmware speed control Low noise fan speed control Status monitor for on/off control Support 3-pin fans (without speed control) Pulse Width Modulated (PWM) fan connector
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support
LED	+5V Standby Alert LED Suspend-state indicator LED
Other Features	Chassis Intrusion Header


System BIOS

BIOS Type	8Mb Flash EEPROM with Phoenix BIOS®
BIOS Features	Plug and Play (PnP) APM 1.2 DMI 2.3 support PCI 2.2 ACPI 1.0 USB Keyboard support