5014C-MT


 
Key Features
1. Intel® Pentium® 4 LGA775 Package
    800MHz FSB, Celeron® 533MHz FSB
2. Up to 4GB DDRII 400 / 533MHz
    Unbuffered ECC / Non-ECC SDRAM
3. 1 x 64-bit 133MHz Full-height
    / half-length PCI-X Slot
4. 2x Broadcom BCM5721 Gigabit LAN
    Controllers
5. IPMI 2.0 Support
6. 4 x 1" SATA Hot-swap
    Drive Bays
7. 300W Cold-swap Power Supply

 




 


 
Motherboard
 

Super P8SCT
 
Processor/Cache
 
CPU
  • Single LGA775 (Prescott) ZIF Socket
  • Supports an Intel® Pentium® 4 processor (800MHz FSB)
  • Supports an Intel® Celeron® processor with (533MHz FSB)
  • Hyper-threading enabled
System Bus
  • 800 / 533 MHz system bus
 
System Memory
 
Memory Capacity
  • Four 240-pin DIMM sockets
  • Supports up to 4 GB DDRII 400MHz/533MHz unbuffered ECC/non-ECC memory
  • Dual channel memory bus
Memory Type
  • DDRII 400/533MHz unbuffered ECC/non-ECC SDRAM, 72-bit, 240-pin, gold-plated DIMMs
DIMM Sizes
  • 256Mb, 512Mb, 1Gb densities
  • 256MB, 512MB, 1GB SDRAM modules
  • Total 128MB to 4GB memory capacity
Memory Voltage
  • 1.8 V only
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
 
Chipset
  • Intel E7221 (Copper River) chipset
  • ICH6R + PXH-V
Serial ATA
  • SATA controller integrated in Intel® ICH6R
  • RAID 0, 1, 10 support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0 (Optional) Card not included.
Network Controllers
  • 2x Broadcom BCM5721 Gigabit Ethernet Controllers
  • Supports 100/1000BASE-T, RJ45 output
Graphics
  • Onboard integrated server quality video graphics in MCH
Super I/O
  • Winbond 83627HF chip
Clock Generator
  • ICH954101DF
 
Expansion Slots
 
PCI-Express / PCI-X
  • 1x 64-bit PCI-X 133MHz slot (with Riser Card)
 
Input / Output
 
Serial ATA
  • Four Serial ATA ports
  • Four SATA hard drives supported
IDE
  • One EIDE channel supports up to two UDMA / IDE devices
  • Supports PIO Mode 4, and ATA/100
Floppy
  • 1 Floppy controller; 1.44 MB,
LAN
  • 2x RJ45 LAN port
USB
  • 2x rear USB 2.0 / 1.1 ports
  • 4x USB 2.0 / 1.1 internal headers for 4x ports
VGA
  • 1x VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1x Fast UART 16550 serial ports
  • 1x serial header
Parallel Port
  • 1x ECP/EEP Parallel Port
 
System BIOS
 
BIOS Type
  • 8Mb Flash EEPROM with Award BIOS® 49LF008A/SST
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • PCI 2.2
  • DMI 2.3
  • ACPI 1.0 (limited)
  • BIOS Rescue hot keys
  • USB Keyboard support
  • SMBIOS 2.3
  • RTC (Real Time Clock) Wakeup
 
 
Chassis
 
Form Factor
  • 1U Rackmount
Model
  • SC813MT-300C
 
Dimensions
 
Height
  • 1.7" (43mm)
Width
  • 17.2" (438mm)
Depth
  • 19.8" (504mm)
Gross Weight
  • 34.5 lbs (15.6kg)
Available Colors
  • Beige, Black
 
Front Panel
 
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat / Fan Failure LED
Ports
  • 2x USB Ports (USB 2.0 Ready)
  • 1x Serial COM Port
 
Drive Bays
 
Hot-swap
  • 4x 1" Hot-swap SATA drive bays
 
Peripheral Drives
 
CD-ROM
  • TEAC Slim 24x CD-ROM drive
 
SATA Backplane
 
1x SATA Backplane
 
System Cooling
 
Fans
  • 3x 12.5K RPM fans
 
Power Supply
 
Fixed 300W AC power supply module w/ PFC
[ 24-pin, (4-pin=12V) ]
AC Voltage
  • 100 - 240V, 60-50Hz, 5 Amp Max
DC Output
  • 12V1 + 12V2 Current ≤ 20A
  • 5V + 3.3V Power ≤ 140W
+5V
  • 15.0 Amp
+5V standby
  • 2.0 Amp
+12V1
  • 15.0 Amp
+12V2
  • 15.0 Amp
-12V
  • 1.0 Amp
+3.3V
  • 15.0 Amp
 
Regulatory (Power Supply)
 
Safety / EMC
  • USA - UL Listed, FCC
  • Canada - CUL listed
  • Germany - TUV Certified
  • Europe/CE Mark
  • EN 60950/IEC 60950-Compliant
 
PC Health Monitoring
 
CPU
  • Monitors for CPU Core, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT
  • CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
FAN
  • Total of five 3-pin fan headers
  • 5x fans with tachometer monitoring
  • Status monitor for speed control
  • Low noise fan speed control
Temperature
  • Monitoring for CPU, chassis environment
  • CPU thermal trip support
  • I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) Support
LED
  • CPU / System Overheat LED
  • Suspend-state indicator LED
  • +5V standby alert LED
Other Features
  • Chassis intrusion header
  • SDDC