5014C-MR


 
Key Features
1. Intel® Pentium® 4 LGA775 Package
    800MHz FSB, Celeron® 533MHz FSB
2. Up to 4GB DDRII 400 / 533MHz SDRAM
3. 1 x 64-bit 133MHz Full-height /
    half-length PCI-X Slot
4. 2 x Broadcom BCM5721 Gigabit LAN
    Controllers
5. Support for IPMI 2.0
6. Supports up to One3.5" SATA HDD
7. 260W Power Supply

 




 


 
Motherboard
 

Super P8SCi
 
Processor/Cache
 
CPU
  • Single LGA775 (Prescott) ZIF Socket
  • Supports an Intel® Pentium® 4 processor (800MHz FSB)
  • Supports an Intel® Celeron® processor with (533MHz FSB)
  • Hyper-threading enabled
System Bus
  • 800 / 533 MHz system bus
 
System Memory
 
Memory Capacity
  • Four 240-pin DIMM sockets
  • Supports up to 4 GB DDRII 400 / 533MHz unbuffered ECC memory
  • Dual channel memory bus
  • Memory must be populated in pairs
Memory Type
  • DDRII 400 / 533MHz unbuffered ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 256MB, 512MB, 1GB
  • Unbuffered ECC / non-ECC DDRII
  • Total 256MB to 4GB memory
Memory Voltage
  • 1.8 V only
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
 
Chipset
  • Intel E7221 (Copper River) chipset
  • ICH6R + FWH + BCM5721
Serial ATA
  • Intel® ICH6R SATA controller
  • RAID 0, 1, JBOD support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0 (Optional) Card not included.
Network Controllers
  • 2x Broadcom BCM5721 Gigabit Ethernet Controllers
  • Supports 10/100/1000BASE-T, RJ45 output
Graphics
  • Onboard integrated server quality graphics in MCH
Super I/O
  • Winbond 83627THF chip
 
Expansion Slots
 
PCI-Express / PCI-X
  • 1x 64-bit PCI-X 133MHz slot (with Riser Card)
 
Input / Output
 
Serial ATA
  • Up to one SATA hard drive supported
IDE
  • One EIDE channel supports up to two UDMA IDE devices
  • Supports UDMA Mode 5, and ATA/100
Floppy
  • 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
Infrared
  • 1x Infrared port header
LAN
  • 2x RJ45 LAN port
USB
  • 2x USB 2.0 / 1.1 ports
  • 4x USB 2.0 / 1.1 header for 4x ports
VGA
  • 1x VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1x Fast UART 16550 serial ports
  • 1x serial header
Parallel Port
  • 1x ECP/EEP Parallel Port
 
System BIOS
 
BIOS Type
  • 8Mb Flash EEPROM with AwardBIOS®
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI 1.0
  • USB Keyboard support
 
 
Chassis
 
Form Factor
  • 1U Rackmount
Model
  • SC512C-260
 
Dimensions
 
Height
  • 1.7" (43mm)
Width
  • 16.8" (426mm)
Depth
  • 14" (358mm)
Gross Weight
  • 17 lbs (7.7kg)
Available Colors
  • Beige, Black
 
Front Panel
 
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat / Fan Failure LED
Ports
  • 2x USB Ports (USB 2.0 Ready)
 
Peripheral Drives
 
Floppy
  • 3.5" 1.44MB Slim Floppy Drive
CD-ROM
  • Slim 24x CD-ROM drive
 
System Cooling
 
Fans
  • 1x 5K RPM 10cm Blower Fan
 
Power Supply
 
Thermal control 260W AC power supply with PFC
[ 24-pin, 4-pin=12V, (2) 4-pin ]
AC Voltage
  • 100 - 240V, 60-50Hz, 5-3 Amp
DC Output
  • 5V + 3.3V ≤ 140W
+5V
  • 25.0 Amp
+5V standby
  • 2.0 Amp
+12V
  • 21.0 Amp
-12V
  • 1.0 Amp
+3.3V
  • 15.0 Amp
 
Regulatory (Power Supply)
 
Safety / EMC
  • USA - UL Listed, FCC
  • Canada - CUL listed
  • Germany - TUV Certified
  • Europe/CE Mark
  • EN 60950/IEC 60950-Compliant
 
PC Health Monitoring
 
CPU
  • Monitors for CPU Cores, +1.8V, +3.3V, +5, ±12V, +5V Standby
  • CPU Core 4-Phase-switching voltage regulator w/ auto-sense from 0.8375V-1.6000V
FAN
  • Total of five 3-pin fan headers
  • 5x fans with tachometer monitoring
  • Status monitor with firmware/software speed control
  • Support 3-pin fans
Temperature
  • Monitoring for CPU, chassis, environment
  • CPU thermal trip support
  • Thermal control for 5x fan connectors
  • I2C temperature sensing logic
LED
  • CPU / System Overheat LED
  • +5V standby alert LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header