5014C-M8


 
Key Features
1. Intel® Pentium® 4 LGA775 Package
    800MHz FSB, Celeron® 533MHz FSB
2. Up to 4GB DDRII 400 / 533MHz
    Unbuffered ECC / Non-ECC SDRAM
3. 1x 64bit 100 Mhz Full-height, Half-length
    I/O Expansion Slot
4. 2x Broadcom BCM5721 Gigabit LAN
    Controllers
5. Zero Channel RAID Support
6. 4 x 1" Ultra320 SCSI Hot-swap
    Drive Bays
7. 300W Cold-swap Power Supply

 




 


 
Motherboard
 

Super P8SC8
 
Processor/Cache
 
CPU
  • Single LGA775 (Prescott) ZIF Socket
  • Supports an Intel® Pentium® 4 processor (800MHz FSB)
  • Supports an Intel® Celeron® processor with (533MHz FSB)
  • Hyper-threading enabled
System Bus
  • 800 / 533 MHz system bus
 
System Memory
 
Memory Capacity
  • Four 240-pin DIMM sockets
  • Supports up to 4 GB DDRII 400 / 533MHz unbuffered ECC or Non-ECC memory
  • Dual channel memory bus
  • Memory must be populated in pairs
Memory Type
  • DDRII 400 / 533MHz unbuffered ECC or Non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 256MB, 512MB, 1GB
  • Unbuffered ECC / non-ECC DDRII
  • Total 256MB to 4GB memory
Memory Voltage
  • 1.8 V only
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
 
Chipset
  • Intel E7221 (Copper River) chipset
  • ICH6R + FWH + BCM5721
SCSI
  • Adaptec AIC-7902 Controller
  • Dual-Channel Ultra320 SCSI
  • Host RAID 0, 1, 10, JBOD support
RAID
  • Support for Zero-Channel RAID with Adaptec 2010S ZCR Card (Card NOT included)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0 (Optional) Card not included.
Network Controllers
  • 2x Broadcom BCM5721 Gigabit Ethernet Controllers
  • Supports 10/100/1000BASE-T/RJ45 output
Graphics
  • Onboard integrated server quality graphics in MCH
Super I/O
  • Winbond 83627THF chip
 
Expansion Slots
 
PCI-Express / PCI-X
  • 1x 64-bit PCI-X 100MHz slot (with Riser Card)
 
Input / Output
 
IDE
  • One EIDE channel supports up to two UDMA IDE devices
  • Supports UDMA Mode 5, and ATA/100
LAN
  • 2x RJ45 LAN port
USB
  • 2x USB 2.0 / 1.1 ports
  • 4x USB 2.0 / 1.1 header for 4x ports
VGA
  • 1x VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 1x Fast UART 16550 serial ports
  • 1x serial header
Parallel Port
  • 1x ECP/EEP Parallel Port
 
 
Chassis
 
Form Factor
  • 1U Rackmount
Model
  • SC813MS-300C
 
Dimensions
 
Height
  • 1.7" (43mm)
Width
  • 17.2" (438mm)
Depth
  • 19.8" (504mm)
Gross Weight
  • 34.5 lbs (15.6kg)
Available Colors
  • Beige, Black
 
Front Panel
 
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
Ports
  • 2x USB Ports (USB 2.0 Ready)
  • 1x Serial COM Port
 
Drive Bays
 
Hot-swap
  • 4x 1" Hot-swap Ultra320/160 SCSI drive bays
 
Peripheral Drives
 
CD-ROM
  • TEAC Slim 24x CD-ROM drive
 
SCSI Backplane
 
Single Channel SCSI Backplane w/ SAF-TE
 
System Cooling
 
Fans
  • 3x 4cm fans
y
Power Supply
 
Fixed 300W AC power supply module w/ PFC
[ 24-pin, (4-pin=12V) ]
AC Voltage
  • 100 - 240V, 60-50Hz, 5 Amp
DC Output
  • 5V + 3.3V ≤ 160W
+5V
  • 15.0 Amp
+5V standby
  • 2.0 Amp
+12V1
  • 15.0 Amp
+12V2
  • 15.0 Amp
-12V
  • 1.0 Amp
+3.3V
  • 15.0 Amp
 
PC Health Monitoring
 
CPU
  • Monitors for CPU Cores, +1.8V, +3.3V, +5, ±12V, +5V Standby
  • CPU Core 4-Phase-switching voltage regulator w/ auto-sense from 0.8375V-1.6000V
FAN
  • Total of five 3-pin fan headers
  • 5x fans with tachometer monitoring
  • Status monitor with firmware/software speed control
  • Support 3-pin fans
Temperature
  • Monitoring for CPU, chassis, environment
  • CPU thermal trip support
  • Thermal control for 5x fan connectors
  • I2C temperature sensing logic
LED
  • CPU / System Overheat LED
  • +5V standby alert LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
 
System BIOS
 
BIOS Type
  • 8Mb Flash EEPROM with AwardBIOS®
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI 1.0
  • USB Keyboard support