| |
| |
| CPU |
|
• Single mPGA478 ZIF Sockets
• Supports an Intel® Pentium® 4 processor with 2MB of integrated Advanced Transfer Cache up to 3.4GHz (Extreme Edition)
• Supports an Intel® Celeron® processor with 128KB of integrated Advanced Transfer Cache up to 2.4GHz
• Hyper-threading enabled |
| |
| System Bus |
|
800 / 533 / 400MHz system bus |
| |
| |
| |
| Memory Capacity |
|
• Four 184-pin DIMM sockets
• Supports up to 4 GB of DDR400/333/266 memory
• Dual channel memory bus
• Memory must be populated in pairs |
| |
| Memory Type |
|
DDR400/333/266 ECC, non-ECC, unbuffered SDRAM, 184-pin gold-plated DIMMs |
| |
| DIMM Sizes |
|
256 MB, 512 MB, 1 GB |
| |
| Memory Voltage |
|
2.5 V only |
| |
| |
| |
| Chipset |
|
• Intel® E7210 (Canterwood ES) chipset
• MCH + ICH5R + FWH |
| |
| Serial ATA |
|
• SATA Controller on-chip (Intel® ICH5R)
• Dual Serial ATA ports
• RAID 0, 1 Supported |
| |
| Network Controllers |
|
• Dual Intel® 82541 Gigabit Ethernet
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| |
| Graphics |
|
ATI Rage XL SVGA PCI video controller with 8 MB of video memory |
| |
| |
| |
| 1x full-height, full-length 32-bit 33MHz PCI expansion slot (with Riser Card) |
| |
| |
| |
| IDE |
|
• Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| |
| USB |
|
Up to 8 USB ports |
| |
| Infrared |
|
1 Infrared port header |
| |
| Serial Ports |
|
2 Fast UART 16550 serial ports |
| |
| Parallel Port |
|
1 ECP/EEP Parallel Port |
| |
| Floppy |
|
1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
| |
| Keyboard / Mouse |
|
PS/2 keyboard and mouse ports |
| |
| |
| |
| BIOS Type |
|
4Mb Flash EEPROM with AwardBIOS® |
| |
| BIOS Features |
|
• Plug and Play (PnP)
• APM 1.2
• DMI 2.3 support
• PCI 2.3
• ACPI 1.0
• BIOS rescue hot keys
• Hardware BIOS virus protection
• USB Keyboard support |
| |
|
|
| |
| |
| Form Factor |
|
1U Rackmount |
| |
| Model |
|
SC811T-250 |
| |
| |
| |
| Height |
|
1.7" (43mm) |
| |
| Width |
|
16.8" (426mm) |
| |
| Depth |
|
22.6" (574mm) |
| |
| Gross Weight |
|
34 lbs (15.4 kg) |
| |
| Available Colors |
|
Beige, Black |
| |
| |
| |
| Buttons |
|
• Power On/Off button
• System Reset button |
| |
| LEDs |
|
• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED |
| |
| Ports |
|
none |
| |
| |
| |
| Hot-swap |
|
2x 1" SATA Hot-swap drive bays
|
| |
| |
| |
| 1x 1U 2-Port SATA Backplane w/o SAF-TE |
| |
| |
| |
| 250W AC power supply [ 24-pin ] |
| |
| AC Voltage |
|
• 100 - 240V, 47-63Hz, 4 Amp |
| |
| DC Output |
|
• 12V + 5V + 3.3V ≤ 230W |
| |
| +5V |
|
25.0 amp |
| |
| +5V standby |
|
2.0 amp |
| |
| +12V |
|
13.0amp |
| |
| -12V |
|
0.8 amp |
| |
| +3.3V |
|
20.0 amp |
| |
| |
| |
| CPU |
|
• Monitors for CPU Cores, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT
• CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 0.85V-1.65V
• Adjustable CPU clock frequency ratio settings (via BIOS) |
| |
| FAN |
|
• Total of four 3-pin fan headers
• 3x fans with tachometer monitoring
• Status monitor with firmware/software on/off control |
| |
| Temperature |
|
• Monitoring for CPU, chassis, environment
• CPU thermal trip support |
| |
| LED |
|
• CPU Overheat LED
• System Overheat LED
• +5V standby alert LED
• Suspend-state indicator LED |
| |
| Other Features |
|
• Chassis intrusion detection
• Chassis intrusion header |
| |
|
