5013C-M8



 
Key Features
1. Intel® Pentium® 4 Support up to 3.4 GHz, Celeron® up to 2.4 GHz
2. Up to 4GB DDR 400/333/266 SDRAM
3. 1 x 64-bit 66MHz Full-height, Full-length PCI-X Expansion Slot
4. 1 x Intel® 82547GI CSA, 1x Intel® 82541 Gigabit Ethernet Controller
5. Adaptec AIC-7902 dual channel Ultra320 SCSI
6. 4 x 1" Ultra320 SCSI Hot-swap Drive Bays
7. 300W Power Supply

 
 


 
Motherboard
 

Super P4SC8
 
 
Processor/Cache
 
CPU   • Single mPGA478 ZIF Sockets
• Supports an Intel® Pentium® 4 processor with 2MB of integrated Advanced Transfer Cache up to 3.4GHz (Extreme Edition)
• Supports an Intel® Pentium® 4 processor with up to 3.2GHz. Only use processors with 90 nano or 0.13 micron technology
• Supports an Intel® Celeron® processor with 128KB of integrated Advanced Transfer Cache up to 2.8GHz
• Hyper-threading enabled
 
System Bus   800 / 533 / 400MHz system bus
 
 
System Memory
 
Memory Capacity   • Four 184-pin DIMM sockets
• Supports up to 4 GB of DDR400/333/266 memory
• Dual channel memory bus
• Memory must be populated in pairs
 
Memory Type   DDR400/333/266 unbuffered ECC or non-ECC SDRAM, 184-pin gold-plated DIMMs
 
DIMM Sizes   128MB, 256 MB, 512 MB, 1 GB
 
Memory Voltage   2.5 V only
 
 
On-Board Devices
 
Chipset   • Intel® E7210 (Canterwood ES) chipset
• MCH + 6300ESB + FWH
 
SCSI   • Adaptec AIC-7902 Controller
• Dual-Channel Ultra320 SCSI
 
RAID   Support for Zero-Channel RAID w/ Adaptec 2010S ZCR Card (Card NOT included)
 
Serial ATA   • SATA Controller on-chip (Intel® 6300ESB)
• Dual Serial ATA ports
• RAID 0, 1 Supported
 
Network Controllers   • 1x Intel® 82547GI CSA Gigabit Ethernet Controller
• 1x Intel® 82541 Gigabit Ethernet Controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
 
Graphics   ATI Rage XL SVGA PCI video controller with 8 MB of video memory
 
 
Expansion Slots
 
• 1x full-height, full-length 64-bit 66MHz PCI-X (3.3V) expansion slot (with Riser Card)
 
 
Input / Output
 
IDE   • Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100
 
Floppy   1x Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
 
USB   • 2x USB 2.0 / 1.1 ports
• 1x USB header supports additional 2x USB 2.0 / 1.1 ports)
 
Serial Ports   2x Fast UART 16550 serial ports
 
VGA Port   1x VGA Port
 
Parallel Port   1x ECP/EEP Parallel Port
 
LAN Port   2x RJ45 Ports
 
Keyboard / Mouse   PS/2 keyboard and mouse ports
 
 
 
Chassis
 
Form Factor   1U Rackmount
 
Model   SC813MS-300C
 
 
Dimensions
 
Height   1.7" (43mm)
 
Width   17.2" (438mm)
 
Depth   19.8" (504mm)
 
Gross Weight   38 lbs (17.2 kg)
 
Available Colors   Beige, Black
 
 
Front Panel
 
Buttons   • Power On/Off button
• System Reset button
 
LEDs   • Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
 
Ports   • 2x Front USB Ports
• 1x Serial COM Port
 
 
Drive Bays
 
Hotswap   4 x 1" hot-swap Ultra320/160 SCSI Drive Bays w/ SAF-TE
 
 
Peripheral Drive(s)
 
CDROM   1x 24x TEAC CDROM Drive
 
 
SCSI Backplane
 
1x SCA813 1U SCSI Backplane
 
 
System Cooling
 
Fans   3x 4cm 12,500 RPM Fan
 
 
Power Supply
 
Fixed 300W AC power supply module with PFC
[ 24-pin, (4-pin=12V) ]
AC Voltage
  • 100 - 240V, 60-50Hz, 5 Amp
DC Output
  • 5V + 3.3V ≤ 100W
+5V
  • 2.5 Amp
+5V standby
  • 2.0 Amp
+12V
  • 20.0 Amp
-12V
  • 1.0 Amp
+3.3V
  • 15.0 Amp
 
PC Health Monitoring
 
CPU   • Monitors for CPU Cores, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT
• CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 0.85V-1.65V
• Adjustable CPU clock frequency ratio settings (via BIOS)
 
FAN   • Total of five 3-pin fan headers
• 3x fans with tachometer monitoring
• Status monitor with firmware/software on/off control
 
Temperature   • Monitoring for CPU, chassis, environment
• CPU thermal trip support
 
LED   • CPU Overheat LED
• System Overheat LED
• +5V standby alert LED
• Suspend-state indicator LED
 
Other Features   • Chassis intrusion detection
• Chassis intrusion header
 
 
System BIOS
 
BIOS Type   8Mb Flash EEPROM with AwardBIOS®
 
BIOS Features   • Plug and Play (PnP)
• APM 1.2
• DMI 2.3 support
• PCI 2.3
• ACPI 1.0
• BIOS rescue hot keys
• Hardware BIOS virus protection
• USB Keyboard support