5013C-M



 
Key Features
1. Intel® Pentium® 4 Support up to 3.4 GHz, Celeron® up to 2.4 GHz
2. Up to 4GB DDR 400/333/266 SDRAM
3. 1 x 64-bit 66MHz Full-height, Half-length PCI Expansion Slot
4. 1 x Intel® 82547GI CSA, 1x Intel® 82541 Gigabit Ethernet Controller
5. ATI RageXL 8MB PCI Graphic Controller
6. 1 x 3.5" Internal IDE Drive Bays
7. 260W Power Supply

 
 


 
Motherboard
 

Super P4SCi
 
 
Processor/Cache
 
CPU   • Single mPGA478 ZIF Sockets
• Supports an Intel® Pentium® 4 processor with 2MB of integrated Advanced Transfer Cache up to 3.4GHz (Extreme Edition)
• Supports an Intel® Pentium® 4 processor with up to 3.2GHz. Only use processors with 90 nano or 0.13 micron technology
• Supports an Intel® Celeron® processor with 128KB of integrated Advanced Transfer Cache up to 2.8GHz
• Hyper-threading enabled
 
System Bus   800 / 533 / 400MHz system bus
 
 
System Memory
 
Memory Capacity   • Four 184-pin DIMM sockets
• Supports up to 4 GB of DDR400/333/266 memory
• Dual channel memory bus
• Memory must be populated in pairs
 
Memory Type   DDR400/333/266 ECC, non-ECC, unbuffered SDRAM, 184-pin gold-plated DIMMs
 
DIMM Sizes   128MB, 256 MB, 512 MB, 1 GB
 
Memory Voltage   2.5 V only
 
 
On-Board Devices
 
Chipset   • Intel® E7210 (Canterwood ES) chipset
• MCH + 6300ESB + FWH
 
Network Controllers   • 1x Intel® 82547GI CSA Gigabit Ethernet Controller
• 1x Intel® 82541 Gigabit Ethernet Controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
 
Graphics   ATI Rage XL SVGA PCI video controller with 8 MB of video memory
 
 
Expansion Slots
 
1x full-height, half-length 64-bit 66MHz PCI expansion slot (with Riser Card)
 
 
Input / Output
 
IDE   • Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100
 
Floppy   1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
 
USB   • 2x USB 2.0 / 1.1 ports
• 1x USB header supports additional 2x USB 2.0 / 1.1 ports)
 
Serial Ports   2 Fast UART 16550 serial ports
 
VGA Port   1 VGA Port
 
Parallel Port   1 ECP/EEP Parallel Port
 
LAN Port   2x RJ45 Ports
 
Keyboard / Mouse   PS/2 keyboard and mouse ports
 
 
 
Chassis
 
Form Factor   1U Rackmount
 
Model   SC512C-260
 
 
Dimensions
 
Height   1.7" (43mm)
 
Width   16.8" (426mm)
 
Depth   14.1" (358mm)
 
Gross Weight   23 lbs (10.4 kg)
 
Available Colors   Beige, Black
 
 
Front Panel
 
Buttons   • Power On/Off button
• System Reset button
 
LEDs   • Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
 
Ports   • 2x USB Ports
 
 
Drive Bays
 
Internal Bay   • 1x 3.5" internal drive bay
 
 
System Cooling
 
Fans   1x 90mm blower fan
 
 
Power Supply
 
Thermal control 260W AC power supply with PFC
[ 24-pin, 4-pin=12V, (2) 4-pin ]
AC Voltage
  • 100 - 240V, 60-50Hz, 5-3 Amp
DC Output
  • 5V + 3.3V ≤ 140W
+5V
  • 25.0 Amp
+5V standby
  • 2.0 Amp
+12V
  • 21.0 Amp
-12V
  • 1.0 Amp
+3.3V
  • 15.0 Amp
 
PC Health Monitoring
 
CPU   • Monitors for CPU Cores, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT
• CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 0.85V-1.65V
• Adjustable CPU clock frequency ratio settings (via BIOS)
 
FAN   • Total of five 3-pin fan headers
• 3x fans with tachometer monitoring
• Status monitor with firmware/software on/off control
 
Temperature   • Monitoring for CPU, chassis, environment
• CPU thermal trip support
 
LED   • CPU Overheat LED
• System Overheat LED
• +5V standby alert LED
• Suspend-state indicator LED
 
Other Features   • Chassis intrusion detection
• Chassis intrusion header
 
 
System BIOS
 
BIOS Type   8Mb Flash EEPROM with AwardBIOS®
 
BIOS Features   • Plug and Play (PnP)
• APM 1.2
• DMI 2.3 support
• PCI 2.3
• ACPI 1.0
• BIOS rescue hot keys
• Hardware BIOS virus protection
• USB Keyboard support