| |
| |
| CPU |
|
• Dual FCPGA370 ZIF Sockets
• Supports an Intel® Pentium® III processor with 512KB of integrated Advanced Transfer Cache up to 1.4GHz |
| |
| System Bus |
|
133MHz/100MHz system bus |
| |
| |
| |
| Memory Capacity |
|
• Four 168-pin DIMM sockets
• Supports up to 4 GB of PC133/100 memory |
| |
| Memory Type |
|
• PC133/100 72-bit registered ECC SDRAM, 168-pin gold-plated DIMMs |
| |
| DIMM Sizes |
|
64 MB, 128 MB, 256 MB, 512 MB, 1 GB |
| |
| Memory Voltage |
|
2.5 V only |
| |
| |
| |
| Chipset |
|
• Serverworks™ Serverset III LE chipset
• CNB30LE + OSB4/OSB5 |
| |
| SCSI |
|
• Adaptec AIC-7892 Controller
• Single-Channel Ultra160 SCSI |
| |
| Network Controllers |
|
• 2x Intel® 82559 10/100 Ethernet
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| |
| Graphics |
|
ATI Rage XL SVGA PCI video controller with 8 MB of video memory |
| |
| |
| |
| PCI Expansion |
|
• 2x 64-bit 66/33MHz PCI (3.3V) slots
• 2x 32-bit 33MHz PCI (5V) slots |
| |
| IDE |
|
• Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| |
| USB |
|
Up to 2 USB ports |
| |
| Serial Ports |
|
2 Fast UART 16550 serial ports |
| |
| Parallel Port |
|
Port header provided; parallel cable required for parallel port |
| |
| Floppy |
|
1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
| |
| Keyboard / Mouse |
|
PS/2 keyboard and mouse ports |
| |
| |
| |
| BIOS Type |
|
4Mb Flash EEPROM with AMI® BIOS |
| |
| BIOS Features |
|
• Plug and Play (PnP)
• APM 1.2
• DMI 2.1
• PCI 2.2
• ACPI 1.0
• BIOS rescue hot keys
• Hardware BIOS virus protection
• USB Keyboard support |
| |
|
|
| |
| |
| Form Factor |
|
Pedestal Server Tower |
| |
| Model |
|
SC830-W |
| |
| |
| |
| Height |
|
19.9" (505mm) |
| |
| Width |
|
15.0" (381mm) |
| |
| Depth |
|
22.8" (579mm) |
| |
| Gross Weight |
|
104 lbs (47.3kg) |
| |
| Available Colors |
|
Beige, Black |
| |
| |
| |
| Buttons |
|
• Power On/Off button
• System Reset button |
| |
| LEDs |
|
• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
• Power Fail LED |
| |
| |
| |
| Hot-swap |
|
• 4x 1" SCA Ultra320/160 Hot-swap Drives |
| |
| Peripheral Bay(s) |
|
• 9x 5.25" Peripheral Drive Bays
• 2x 3.5" Peripheral Drive Bays |
| |
| |
| |
| SCAU160 SCA SCSI Backplane for Pedestal Chassis |
| |
| |
| |
| Fans |
|
• 4x 90mm Hot-swappable Fans
• 2x 90mm Rear Exhaust Fan |
| |
| |
| |
| 300W + 300W Redundant Hot-swap AC power supply w/ PFC |
| |
| +5V |
|
30.0 Amp |
| |
| +5V standby |
|
1.5 Amp |
| |
| +12V |
|
12.0 Amp |
| |
| +3.3V |
|
15.0 amp |
| |
| |
| |
| CPU |
|
• Monitors for CPU Cores, +5, ±12V
• CPU Core auto-switching voltage regulator w/ auto-sense from 1.4V-3.5V
• Adjustable CPU clock frequency ratio settings (via BIOS) |
| |
| FAN |
|
• Total of seven 3-pin fan headers
• 2x fans with tachometer monitoring
• Status monitor with firmware/software on/off control |
| |
| Temperature |
|
• Monitoring for CPU, chassis, environment |
| |
| LED |
|
• CPU Overheat LED
• System Overheat LED
• Suspend-state indicator LED |
| |
| Other Features |
|
• Chassis intrusion detection (through LDCM)
• Chassis intrusion header |
| |
|
