| |
| |
| CPU |
- Dual 940-pin ZIF Sockets
- Supports up to two Dual-Core AMD Opteron™ 200 Series processor(s)
- VRM x3
|
| Chipset |
- HyperTransport Link
- nVidia nForce Pro 2200 (CK804)
- nVidia nForce Pro 2050 (CKIO4)
|
| |
| |
| Memory Capacity |
- Eight 184-pin DIMM sockets
- Supports up to 16 GB DDR 400 MHz memory or
- Supports up to 16 GB DDR 333 MHz memory or
- Supports up to 32 GB DDR 266 MHz memory
- Single or Dual(recommended) channel memory
- For Single CPU: Memory must be populated in the adjacent memory bank
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
|
| Memory Type |
- DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1GB, 2GB, 4GB**
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
| |
| SATA |
- nVidia nForce Pro 2200 SATA2 Controller
- nVidia nForce Pro 2050 SATA2 Controller
- 8 SATA Ports
- nVidia RAID 2.0
- SATA RAID 0, 1, 10 & JBOD support
|
| Network Controllers |
- nVidia nForce Pro 2200 & 2050 Dual Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| Audio |
- AC'97 audio CODEC with high quality 6-channel sound
- Front-side audio header
|
| |
| |
| PCI-Express |
- 2x PCI-e x16 slots
- 2x PCI-e x4 (using x8) slots
|
| PCI |
|
| |
| |
| Serial ATA |
- Integrated SATA2 Controller
- Eight Serial ATA Connectors
- Eight SATA hard drives supported
|
| IDE |
- Dual ATA 133/100 EIDE channels support up to four UDMA IDE devices
|
| Floppy |
- 1 Floppy port; 1.44 MB, 2.88 MB, 3-mode support
|
| LAN |
|
| USB |
- FUCI
- Up to 8 USB Ports 2.0 Compliant, 1.1 Compatible
|
| Audio |
- 1 Line In / Line Out / Microphone ports
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 2 Fast UART 16550 serial ports
|
| Parallel Ports |
|
|
|
| |
| |
| Form Factor |
- Tower / 4U Rackmountable
- Optional Rackmount Kit (CSE-PT26)
|
| Model |
|
| |
| |
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
| |
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
|
| Ports |
|
| |
| |
| Hot-swap |
- 8x 1" SATA Hot-swap Drives
|
| Peripheral Bay(s) [90o Rotatable] |
- 2x 5.25" Peripheral Drive Bay
- 1x 5.25" Bay For Floppy Drive
|
| |
| |
| Floppy |
- Panasonic 3.5" 1.44MB Floppy Drive
|
| |
| |
| SATA Hard Drive Backplane |
| |
| |
| Fans |
- 4x 5000 RPM Hot-swappable PWM Cooling Fans
|
| |
| |
645W Low-Noise AC power supply with PFC
[ 24-pin, (4-pin, 8-pin) = 12V ] |
| AC Voltage |
- 100 - 240V, 50/60Hz, 11-5.5 Amp
|
| DC Output |
|
| +5V |
|
| +5V standby |
|
| +12V |
|
| -12V |
|
| +3.3V |
|
| |
| |
| CPU |
- Monitors CPU Core Voltages, +3.3V, +5V, ±12V & +3.3V Standby, HyperTransport Link voltage 1.2V, memory voltage 2.5V, nVidia nForce Pro 2200 & 2050 voltage 1.5V
- Up to 8 fan status
- Supports System Management Utility
- S3 Suspend To RAM (STR)
|
| FAN |
- Total up to 8-fan status
- 3-pin fan speed control or
- 4-pin PWM fan connector
|
| Temperature |
- Monitoring for CPU, chassis, environment
|
| LED |
|
| Other Features |
|
| |
| |
| BIOS Type |
- 4Mb Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- APM 1.2
- DMI 2.1
- ACPI 1.0
- Fan Speed Control
|
|
