| |
| |
| CPU |
- Dual 940-pin ZIF Sockets
- Supports up to two Dual-Core AMD Opteron™ 200 Series processor(s)
- VRM x3
|
| Chipset |
- AMD 8131 HyperTransport PCI-X Tunnel
- AMD 8111 HyperTransport I/O Hub
|
| |
| |
| Memory Capacity |
- Eight 184-pin DIMM sockets
- Supports up to 16 GB DDR 400 MHz memory or
- Supports up to 16 GB DDR 333 MHz memory or
- Supports up to 32 GB DDR 266 MHz memory
- Single or Dual (recommended) channel memory
- For Single CPU: Memory must be populated in CPU1 DIMMs only
- For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
|
| Memory Type |
- DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256 MB, 512 MB, 1GB, 2GB, 4GB**
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| |
| |
| SCSI |
- Adaptec AIC-7902W Controller
- Ultra320 SCSI with Host RAID (Host RAID only supports 4 drives)
- Host RAID 0, 1, 10, JBOD
|
| Zero Channel RAID |
- Support for Zero-Channel RAID with Adaptec 2010S SCSI ZCR Card or AOC-LPZCR1
- (Card not included)
|
| IPMI |
- 1U support for Intelligent Platform Management Interface v.2.0 (Optional: 1UIPMI-B)
- 2U, 3U, 4U support for Intelligent Platform Management Interface v.2.0, Low Profile (
Optional: AOC-LPIPMI)
- RMM (Remote Management Module)
- (Card not included)
|
| Network Controllers |
- Broadcom® 5704 Dual Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
|
| VGA |
- ATI Rage XL 8MB PCI Graphics Controller
|
| |
| |
| PCI-X |
- 2 64-bit 133/100MHz PCI-X (3.3V) slots
- 2 64-bit 66MHz PCI-X (3.3V) slots
|
| PCI |
- 2 32-bit 33MHz PCI (5V) slots
|
| IPMI |
|
| |
| |
| IDE |
- Dual ATA 133/100 EIDE channels support up to four UDMA IDE devices
|
| Floppy |
- 1 Floppy port; 1.44 MB, 2.88 MB, 3-mode support
|
| LAN |
|
| USB |
- FUCI
- Up to 5 USB Ports 1.1 Compliant
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 2 Fast UART 16550 serial ports
|
|
|
| |
| |
| Form Factor |
- Tower / 4U Rackmountable
- Optional Rackmount Kit (CSE-PT26)
|
| Model |
|
| |
| |
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
| |
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power Fail LED
|
| Ports |
|
| |
| |
| Hot-swap |
- 8x 1" SCA Ultra320/160 Hot-swap Drives
|
| Peripheral Bay(s) |
- 2x 5.25" Peripheral Drive Bay
- 1x 5.25" Bay For Floppy Drive
|
| |
| |
| Floppy |
- Panasonic 3.5" 1.44MB Floppy Drive
|
| |
| |
| Single-Channel SCSI Hard Drive Backplane |
| |
| |
| Fans |
- 4x 5000 RPM Hot-Swappable Cooling Fans
- 2x 5000 RPM Hot-Swappable Rear Exhaust Fan
|
| |
| |
760W Triple-Redundant AC power supply with PFC
[ 24-pin, (8-pin, 4-pin)=12V ] |
| AC Voltage |
- 100 - 240V, 50-60Hz, 14 Amp Max
|
| DC Output |
|
| +5V |
|
| +5V standby |
|
| +12V |
|
| -12V |
|
| +3.3V |
|
| |
| |
| CPU |
- Monitors CPU Core Voltages, +3.3V, +5V, ±12V & +3.3V Standby, +5V Standby, HyperTransport voltage 1.2V, memory voltage 2.5V, DDR termination 1.25V, chipset voltage 1.8V
- Up to 8 fan status
- Supports System Management Utility
|
| FAN |
- Total up to 8-fan status
- 3-pin fan speed control or
- 4-pin Pulse Width Modulated (PWM) fan connector
|
| Temperature |
- Monitoring for CPU and chassis environment
|
| LED |
|
| Other Features |
|
| |
| |
| BIOS Type |
- 4Mb Flash EEPROM with AMI® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- ACPI 2.0
- Fan Speed Control
|
|
