AS1020A-T

 
Key Features
1. Dual AMD® Opteron™ Support,
    (Dual Core Ready)
    1000 MHz HyperTransport Link
2. Up to 16GB DDR 400 SDRAM (or)
    Up to 16GB DDR 333 SDRAM (or)
    Up to 32GB DDR 266 SDRAM
3. 2 x 64-bit 133/100MHz PCI-X Slots
    (1x Full-height/Half-length,
    1x Low-profile/Half-length)
4. 1 x Broadcom® 5704 Dual Port Gigabit
    Ethernet Controller
5. Zero Channel RAID Support
6. 4 x 1" SATA Hot-swap Drive Bays
7. 500W Cold-swap Power Supply
8. IPMI 2.0 Support + 3rd LAN Support

 
 


 
Motherboard
 

H8DAR-T
 
Processor/Chipset
 
CPU
  • Dual 940-pin ZIF Sockets
  • Supports up to two Dual-Core AMD Opteron™ 200 Series processor(s)
  • VRM x4
Chipset
  • HyperTransport Link
  • AMD 8132 HyperTransport PCI-X Tunnel
  • AMD 8111 HyperTransport I/O Hub
 
System Memory
 
Memory Capacity
  • Eight 184-pin DIMM sockets
  • Supports up to 16 GB DDR 400 MHz memory or
  • Supports up to 16 GB DDR 333 MHz memory or
  • Supports up to 32 GB DDR 266 MHz memory
  • Single or Dual(recommended) channel memory
  • For Single CPU: Memory must be populated in the adjacent memory bank
  • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type
  • DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1GB, 2GB, 4GB**
Memory Voltage
  • 2.5 V only
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
 
SATA
  • Marvell 88SX6041 Controller
  • 4-Port SATA
  • Host RAID 0, 1, JBOD
Zero Channel RAID
  • Support for Zero-Channel RAID with Adaptec 2020SA SATA ZCR Card or AOC-LPZCR1
  • (Card notincluded)
IPMI
  • 1U Support for Intelligent Platform Management Interface v.2.0+ (Optional: 1UIPMI-B)
  • Support for 3rd LAN
    (AOC-1UIPMI-LANG)
  • RMM (Remote Management Module)
  • (Card not included)
Network Controllers
  • Broadcom® 5704 Dual Port Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
VGA
  • ATI Rage XL 8MB PCI Graphics Controller
 
Expansion Slots
 
PCI-X
  • 2x 64-bit 133/100MHz PCI-X (3.3V) slots
  • (One slot for Full-height / Half-length cards, one slot for Low-profile / Half-length cards)
 
Input / Output
 
Serial ATA
  • Four Serial ATA connectors
  • Four SATA hard drives supported
IDE
  • Dual ATA 133/100 EIDE channels support up to four UDMA IDE devices
Floppy
  • 1 Floppy port; 1.44 MB, 2.88 MB, 3-mode support
LAN
  • 2 RJ45 LAN port
USB
  • FUCI
  • Up to 5 USB Ports 1.1 Compliant
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 2 Fast UART 16550 serial ports
 
System BIOS
 
BIOS Type
  • 4Mb Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • SMBIOS 2.3
  • APM 1.2
  • DMI 2.1
  • ACPI 1.0
  • Fan Speed Control
 
 
Chassis
 
Form Factor
  • 1U Rackmount
Model
  • SC813T+-500
 
Dimensions
 
Height
  • 1.7" (43mm)
Width
  • 17.2" (437mm)
Depth
  • 25.6" (650mm)
Gross Weight
  • 36 lbs (16.4kg)
Available Colors
  • Beige, Black
 
Front Panel
 
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
Ports
  • N/A
 
Drive Bays
 
Hotswap
  • 4 x 1" hot-swap SATA Drive Bays with SAF-TE
 
Peripheral Drives
 
Floppy
  • TEAC 3.5" 1.44MB Slim Floppy Drive
CD-ROM
  • TEAC Slim 24x CD-ROM drive
 
Backplane
 
4 x 1" SATA HDD Backplane
 
System Cooling
 
Fans
  • 4x 9cm 10,200 RPM cooling fans
 
Power Supply
 
Cold-swappable 500W AC power supply module with PFC
AC Voltage
  • 100 - 240V, 60-50Hz, 10 Amp Max
DC Output
  • 5V + 3.3V ≤ 160W
+5V
  • 30.0 Amp
+5V standby
  • 2.0 Amp
+12Vall
  • 39.0 Amp Max
-12V
  • 1.0 Amp
+3.3V
  • 21.0 Amp
 
Management
 
Software
  • Optional IPMI (Intelligent Platform Management Interface) 2.0
  • Super Doctor III
  • Watch Dog
Power Configurations
  • ACPI/API Power Management
  • Wake-On-LAN (WOL) header
  • Power-on mode control for AC power loss recovery
  • Internal/External modem remote ring-on
 
PC Health Monitoring
 
CPU
  • Monitors CPU Core Voltages, +3.3V, +5V, ±12V & battery voltage
  • Up to 5 fan status
  • Supports System Management Utility
FAN
  • Total up to 5-fan status
  • 3-pin fan speed control
Temperature
  • Monitoring for CPU, chassis, environment
LED
  • Overheat LED
Other Features
  • Chassis Intrusion Header