AS1020A-8


 
Key Features
1. Dual AMD Opteron™ 200 Series
    Processors
2. Up to 32GB DDR 200 SDRAM (or)
    Up to 16GB DDR 333 SDRAM (or)
    Up to 16GB DDR 400 SDRAM
3. 1 x 64-bit 100MHz Full-height,
    Full-length PCI-X Expansion Slot
4. 1 x Broadcom® 5704 Dual Port Gigabit
    Ethernet Controller
5. Zero Channel RAID Support
6. 3 x 1" Ultra320 SCSI Hot-swap
    Drive Bays
7. 420W Power Supply

 
 


 
Motherboard
 

H8DAR-8
 
Processor/Chipset
 
CPU
  • Dual 940-pin ZIF Sockets
  • Supports up to two Dual-Core AMD Opteron™ 200 Series processor(s)
  • VRM x3
Chipset
  • HyperTransport Link
  • AMD 8131 HyperTransport PCI-X Tunnel
  • AMD 8111 HyperTransport I/O Hub
 
System Memory
 
Memory Capacity
  • Eight 184-pin DIMM sockets
  • Supports up to 16 GB DDR 400 MHz memory or
  • Supports up to 16 GB DDR 333 MHz memory or
  • Supports up to 32 GB DDR 266 MHz memory
  • Single or Dual(recommended) channel memory
  • For Single CPU: Memory must be populated in the adjacent memory bank
  • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type
  • DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1GB, 2GB, 4GB**
Memory Voltage
  • 2.5 V only
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
 
SCSI
  • Adaptec AIC-7902W Controller
  • Dual-Channel Ultra320 SCSI with Host RAID
  • Host RAID 0, 1, 10
Zero Channel RAID
  • Support for Zero-Channel RAID with Adaptec 2015S SCSI ZCR Card or AOC-SOZCR1 (with SO-DIMM ZCR socket)
  • (Card not included)
IPMI
  • 1U support Intelligent Platform Management Interface v.2.0+ (Optional: 1UIPMI-B)
  • RMM (Remote Management Module)
  • (Card not included)
Network Controllers
  • Broadcom® 5704 Dual Port Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
VGA
  • ATI Rage XL 8MB PCI Graphics Controller
 
Expansion Slots
 
PCI-X
  • 1 64-bit 100MHz PCI-X full-height, full-length slot
 
Input / Output
 
IDE
  • Dual ATA 133/100 EIDE channels support up to four UDMA IDE devices
Floppy
  • 1 Floppy port; 1.44 MB, 2.88 MB, 3-mode support
LAN
  • 2 RJ45 LAN port
USB
  • FUCI
  • Up to 5 USB Ports 1.1 Compliant
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 2 Fast UART 16550 serial ports
 
 
Chassis
 
Form Factor
  • 1U Rackmount
Model
  • SC812S-420C
 
Dimensions
 
Height
  • 1.7" (43mm)
Width
  • 16.8" (426mm)
Depth
  • 25.6" (650mm)
Gross Weight
  • 34 lbs (15.4kg)
Available Colors
  • Beige, Black
 
Front Panel
 
Buttons
  • Power On/Off button
  • System Reset button
  • NMI button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
Ports
  • 2x USB Ports
  • 1x RJ45 COM Port
 
Drive Bays
 
Hotswap
  • 3 x 1" hot-swap Ultra320/160 SCSI Drive Bays with SAF-TE
 
Peripheral Drives
 
Floppy
  • Sony3.5" 1.44MB Slim Floppy Drive
CD-ROM
  • TEAC Slim 24x CD-ROM drive
 
SCSI Backplane
 
1x SCA812S 1U SCSI Backplane w/ SAF-TE
 
System Cooling
 
Fans
  • 2x 10cm blower fans
 
Power Supply
 
Fixed 420W AC power supply with PFC
AC Voltage
  • 100 - 240V, 60-50Hz, 7 Amp Max
DC Output
  • 5V + 3.3V ≤ 160W
+5V
  • 30.0 Amp
+5V standby
  • 2.0 Amp
+12V1
  • 15.0 Amp
+12V2
  • 15.0 Amp
+12V3
  • 18.0 Amp
+12Vall
  • 32.0 Amp Max
-12V
  • 1.0 Amp
+3.3V
  • 20.0 Amp
 
System BIOS
 
BIOS Type
  • 4Mb Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • SMBIOS 2.3
  • APM 1.2
  • DMI 2.1
  • ACPI 1.0
  • Fan Speed Control
 
PC Health Monitoring
 
CPU
  • Monitors CPU Core Voltages, +3.3V, +5V, ±12V & +3.3V Standby, HyperTransport voltage 1.2V, memory voltage 2.5V, DDR termination 1.25V, chipset voltage 1.8V
  • Up to 5 fan status
  • Supports System Management Utility
FAN
  • Total up to 5-fan status
  • 3-pin fan speed control
Temperature
  • Monitoring for CPU, chassis, environment
LED
  • Overheat LED
Other Features
  • Chassis Intrusion Header