AMD (A+) AS1010P-T

AMD supermicro 1u rackmount server AS1010P-T

 
Key Features
1. Single AMD® Opteron™ Support,
    (Dual Core Ready)
    1000 MHz HyperTransport Link
2. Up to 8GB DDR 400 SDRAM (or)
    Up to 16GB DDR 333 SDRAM (or)
    Up to 16GB DDR 266 SDRAM
3. 1 x 64-bit 133MHz Full-height / length
    PCI-X Slot,
    1 x 64-bit 100MHz Full-height / length
    PCI-X Slot
4. Dual-port Gigabit ServerWorks HT1000
    LAN/Ethernet Controller
5. Zero Channel RAID Support
6. 4 x 1" Hot-swap SATA
    Drive Bays
7. 400W Power Supply




 

 
Product SKUs
 
AS-1010P-T
  • A+ Server 1010P-T (Beige)
AS-1010P-TB
  • A+ Server 1010P-T (Black)
 
Motherboard
 

Super H8SSP-i
 
Processor/Chipset
 
CPU
  • Single 940-pin ZIF Sockets
  • Supports a single Dual-Core AMD Opteron™ 200 Series processor(s)
  • 1MB Cache
  • VRM x3
Chipset
  • ServerWorks HT2000
  • ServerWorks HT1000
 
System Memory
 
Memory Capacity
  • Four 184-pin DIMM sockets
  • Supports up to 8 GB DDR 400 MHz memory or
  • Supports up to 16 GB DDR 333 MHz memory or
  • Supports up to 16 GB DDR 266 MHz memory
  • Single or Dual (recommended) channel memory support
Memory Type
  • DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1GB, 2GB, 4GB**
Memory Voltage
  • 2.5 V only
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
 
On-Board Devices
 
SATA
  • 4 SATA Ports using ServerWorks HT1000 controller
IDE
  • Supports UDMA Mode 5
  • Supports PIO Mode 4
  • Supports ATA/100
IPMI
  • 1U support: Intelligent Platform Management Interface v.2.0+ (Optional: 1UIPMI-B) or
  • For 2U and above: (Optional: LPIPMI)
  • Remote Management Module
  • (Card not included)
Network Controllers
  • Broadcom BCM5704C Dual Gigabit Ethernet Controller
  • Supports 1000BASE-T, RJ45 output
VGA
  • ATI Rage XL 8MB PCI Graphics Controller
  • VGA Port
Super I/O
  • NS PC87427
Clock Generator
  • ICS932S801AG
 
Expansion Slots
 
PCI-Express
  • 2 PCI-e x8 slots (Optional with Riser Card)
PCI-X
  • 1 64-bit 133MHz PCI-X (3.3V) slot
  • 1 64-bit 100MHz PCI-X (3.3V) slot
IPMI
  • IPMI 2.0 expansion slot
 
Input / Output
 
SATA
  • Up to four SATA devices
IDE
  • Single ATA 100 EIDE channels support up to two UDMA IDE devices
  • Supports UDMA Mode 5
  • Supports ATA/100
Floppy
  • 1 Floppy port; 1.44 MB
LAN
  • 2 RJ45 LAN ports
USB
  • 2 USB Rear Ports
  • 2 USB Internal Headers
  • USB 2.0 Compliant, 1.1 Compatible
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 2 Fast UART 16550 serial ports
  • 1 Header
 
 
Chassis
 
Form Factor
  • 1U Rackmount
Model
  • SC816T-400
 
Dimensions
 
Height
  • 1.7" (43mm)
Width
  • 17.2" (438mm)
Depth
  • 26.8" (681mm)
Gross Weight
  • 46 lbs (20.9kg)
Available Colors
  • Beige, Black
 
Front Panel
 
Buttons
  • Power On/Off button
  • System Reset button
  • UID button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
  • UID LED
Ports
  • none
 
Drive Bays
 
Hot-swap
  • 4x 1" Hot-swap SATA drive bays
 
Peripheral Drives
 
Floppy
  • TEAC 3.5" 1.44MB Slim Floppy Drive
DVD-ROM
  • Panasonic Slim 8x DVD-ROM Drive
 
SATA Backplane
 
4-Port SATA Backplane
 
System Cooling
 
Fans
  • 3x 15000 RPM Nidec Dual Blade Fans
 
Power Supply
 
400W AC power supply with PFC
AC Voltage
  • 100 - 240V, 50-60Hz, 6A-3A Amp
+5V
  • 24 Amp
+5V standby
  • 4 Amp
+12V
  • 32 Amp
-12V
  • 0.6 Amp
+3.3V
  • 21 Amp
 
PC Health Monitoring
 
CPU
  • Monitors CPU Core Voltages, +5V, ±12V & +2.5V Standby, +2.5V Standby, VBAT.
  • Monitor for HyperTransport voltage 1.2V, memory voltage 2.5V, DDR termination 1.25V
  • Up to 10 fan status
  • Supports System Management Utility
FAN
  • Total of up to 5 proprietary fan headers
  • 10 Tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low-noise Fan Speed Control
  • Overheat backup fan connector
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip support
  • PC temperature sensing logic
LED
  • CPU / Overheat LED
  • Suspend-state indicator LED
  • +5V Standby alert LED
Other Features
  • Chassis Intrusion Detection
  • Chassis Intrusion Header
 
System BIOS
 
BIOS Type
  • 8Mb Flash EEPROM with AMI® BIOS
  • SST49LF080A BIOS Chip
BIOS Features
  • Plug and Play (PnP)
  • ACPI 2.0
  • APM 1.2
  • PCI 2.2
  • DMI 2.3
  • BIOS Rescue Hot Keys
  • SMBIOS 2.3
  • USB Keyboard support

For a cusomised quotation on the AMD based Supermicro server solution AS1010P-T call our sales line on: 020 8997 6000

 
Parts List - (Items Included)
 
  Part Number Qty Description
Motherboard / Chassis MBD-H8SSP-i
CSE-816T-400(B)
1
1
Super H8SSP-i Motherboard
1U SC816T-400 Chassis (B = Black)
Cable(s) CBL-0039
CBL-0078
CBL-0096
CBL-0134
1
1
1
1
CD-ROM Cable
Floppy Cable
18" 4-Lane SAS Cable
IDE Cable
Fan(s) FAN-0085
CSE-PT0100
3
2
15,000 RPM Nidec Dual Blade Fan
Dummy Fans 40x56mm
Hard Drives CSE-PT39(B)
CSE-SAS-814
4
1
1" SCA Hard Drive Trays
4 x 1" SAS/SATA Backplane
Heatsink BKT-0004
BKT-0005
1
1
Mounting Plate for Heatsink
Retention for Heatsink
Mounting Rails CSE-PT51 1 1U Mounting Rail Kit
Peripheral Drives FPD-TEAC-S (B)
DVM-PNSC-824(B)
1
1
TEAC 3.5" 1.44MB Slim Floppy Drive (B = Black)
Slim 8x DVD / 24x CD-ROM Combo Drive (B = Black)
Power Backplane CSE-PT816-PDS20 1 1U Power Distributor Backplane
Power Supply PWS-0064
CSE-PT98
1
1
SP400-1R 400W 1U power supply
Dummy Power Supply Rear Cover
Riser Card CSE-RR1U-X
CSE-RR1U-XR
CSE-RR1U-EL
CSE-RR1U-ER
1
1
1
1
1U 3.3V PCI-X Riser Card - Left Slot Full-height/length (installed)
1U 3.3V PCI-X Riser Card - Right Side Full-height/length (installed)
1U PCI-E Riser Card - Left Side Full-height/length (uninstalled)
1U PCI-E Riser Card - Right Side Full-height/length (uninstalled)
AMD supermicro 1u rackmount server AS1010P-T

 

AMD supermicro 1u rackmount server AS1010P-T AMD supermicro 1u rackmount server AS1010P-T AMD supermicro 1u rackmount server AS1010P-T AMD supermicro 1u rackmount server AS1010P-T