| |
| |
| CPU |
- Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon™ processor(s) of the same type below:
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
|
| System Bus |
|
| Operating System Software |
|
| |
| |
| Memory Capacity |
- Six 184-pin DIMM sockets
- Supports up to 12 GB DDR 333MHz memory or
- Supports up to 24 GB DDR 266MHz memory
- Dual-channel memory bus
- Memory must be populated in pairs
|
| Memory Type |
- DDR333/266MHz Buffered (Registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
|
| DIMM Sizes |
- 256MB, 512 MB, 1GB, 2GB, 4GB**
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Single Device Data Correction (SDDC)
|
| |
| |
| Chipset |
- Intel® E7520 chipset
- MCH + ICH5R + PXH +82546GB
|
| SATA |
- ICH5R Controller for 2 SATA ports
- RAID 0, 1, JBOD support
|
| SATA |
- Marvell 88SX6081 4-port SATA Controller with 3rd-Party Adaptec AIC-8110(4x drive)
- RAID 0, 1, JBOD support
|
| Zero Channel RAID |
- Support for Zero-Channel RAID with Adaptec 2020SA (SATA) ZCR Card: 1A, 3.3V, Low Profile 2.5" x 6.6", 400MHz I/O processor, 64MB ECC DDR memory on board
- [Card not included]
- RAID 0, 1, 10, 5, JBOD
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0 (Optional [1U: 1UIPMI-B])
|
| Network Controllers |
- Intel® 82546GB Dual Port Gigabit Controller
- Supports 10Base-T, 100Base-TX, 1000Base-T, RJ45 output
|
| Graphics |
- ATI Rage XL SVGA PCI video controller with 8MB of video memory
|
| Super I/O |
|
| Clock Generator |
|
| |
| |
| Serial ATA |
- Up to 4 SATA hard drives supported
|
| IDE |
- Dual EIDE channels support up to four UDMA/ IDE devices
- Supports UDMA Mode 5 and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB
|
| LAN |
|
| USB |
- 2x USB rear ports
- 1x USB internal headers
- USB 2.0 / 1.1 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Ports |
- 2 Fast UART 16550 serial headers
|
|
|
| |
| |
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
| |
| Buttons |
- Power On/Off button
- UID button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
- UID LED
|
| Ports |
|
| |
| |
| PCI-Express / PCI-X |
- 2 x Universal (SXB-E) slot for
[1 (x8) PCI-E Slot] OR
[1x 64-bit PCI-X 100MHz slot]
- Supports Full-length add-on cards
|
| |
| |
| Hot-swap |
- 4x 1" Hot-swap SATA drive bays
|
| |
| |
| Floppy |
- TEAC 3.5" 1.44MB Slim Floppy Drive
|
| DVD-ROM |
- Panasonic Slim DVD-ROM drive
|
| |
| |
| 1x SAS-814 1U SATA Backplane |
| |
| |
| Fans |
- 5x 4cm 12,000 RPM Nidec dual blade counter-rotating fans
|
| |
| |
560W Cold-swap redundant AC power supply w/ PFC
[ 24-pin, (8-pin=12V) ] |
| AC Voltage |
- 100 - 240V, 60-50Hz, 10-5 Amp
|
| DC Output |
|
| +5V |
|
| +5V standby |
|
| +12V |
|
| -12V |
|
| +3.3V |
|
| |
| |
| CPU |
- Monitors for CPU Cores, +3.3V, +5V, ±12V, +3.3V Standby
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6V
|
| FAN |
- Total of five proprietary fan headers supporting up to 10 fans
- Status monitor for speed control
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU, chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
|
| LED |
- CPU / System Overheat LED
- Suspend-state indicator LED
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
- SDDC support
|
| |
| |
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix® BIOS, Intel SST
|
| BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.3
- PCI 2.2
- ACPI 1.0
- BIOS rescue hot keys
- USB Keyboard support
|
|
