| |
| |
| SYS-6014P-32R |
- SuperServer
6014P-32R (Beige)
|
| SYS-6014P-32RB |
- SuperServer
6014P-32R (Black)
|
| |
| |
| CPU |
- Dual
604-pin FC-mPGA4
Sockets
- Supports
up to two Intel® 64-bit
Xeon® processor(s)
of the same type
below:
- Xeon
Dual Core (Paxville)
CPU with
1MB L2 Integrated
Advanced Transfer
Cache
- Xeon
(Nocona) CPU with
1MB L2 Integrated
Advanced Transfer
Cache, up to
3.60 GHz
- Xeon
(Irwindale)
CPU with
2MB L2 Integrated
Advanced Transfer
Cache, up to
3.60 GHz
- Xeon
LV (Low Voltage)
CPU,
up to 2.8 GHz
|
| System
Bus |
|
| Operating
System Software |
- Supports
64-bit Operating
Systems
- Supports
32-bit Operating
Systems
- OS
Compatibility
Chart
|
| |
| |
| Memory
Capacity |
- Eight
240-pin DIMM sockets
- Supports
up to 16 GB DDRII
400MHz memory
- Dual-channel
memory bus
- Memory
must be populated
in pairs
- Single-rank
modules are recommended
for 6+ DIMM support
|
| Memory
Type |
- DDRII
400MHz buffered
(registered) ECC
SDRAM 72-bit, 240-pin
gold-plated DIMMs
|
| DIMM
Sizes |
|
| Memory
Voltage |
|
| Error
Detection |
- Corrects
single-bit errors
- Detects
double-bit errors
(using ECC memory)
- Supports
Single Device Data
Correction (SDDC)
|
| |
| |
| Chipset |
- Intel® E7520
chipset
- MCH
+ ICH5R + PXH +82546GB
|
| SAS |
- Adaptec
AIC9410: Adaptec
8-port SAS Controller
- RAID
0, 1, JBOD support
|
| SAS
Zero Channel RAID |
- Support
for Zero-Channel
RAID with Supermicro
All-In-One AOC-LPZCR1 ZCR
Card
- (Card
not included)
|
| IPMI |
- Support
for Intelligent
Platform Management
Interface v.2.0
- (Optional
IPMI Card: AOC-1UIPMI-B)
- 3rd
LAN(GbE) port (Optional: AOC-1UIPMI-LANG)
*Must be used with
Optional IPMI Card
above.
|
| Network
Controllers |
- Intel® 82546GB
Dual Port Gigabit
Controller
- Supports
RJ45 output
|
| Graphics |
- ATI
Rage XL SVGA PCI
video controller
with 8 MB of video
memory
|
| Super
I/O |
|
| |
| |
| PCI-Express
/ PCI-X |
- 1
x Universal (SXB-E)
slot for
[1
(x8) PCI-E Slot]
OR
[1x
64-bit PCI-X 100MHz
slot]
- 1
x Universal (SXB-E)
slot for
[1
(x8) PCI-E Slot]
OR
[1x
64-bit PCI-X 100MHz
slot]
- 1
x IPMI 2.0 Slot
(For optional 3rd
LAN)
- Supports
Full-length add-on
cards
|
| |
| |
| SAS |
- Four
internal SAS ports
- Four
external SAS ports
|
| IDE |
- Dual
EIDE channels support
up to four UDMA/
IDE devices
- Supports
UDMA Mode 5, PIO
Mode 4, and ATA/100
|
| Floppy |
- 1
Floppy controller;
1.44 MB
|
| LAN |
|
| USB |
- 2x
USB rear ports
- 2x
USB internal headers
- USB
2.0 / 1.1 Compliant
|
| VGA |
|
| Keyboard
/ Mouse |
- PS/2
keyboard and mouse
ports
|
| Serial
Ports |
- 2
Fast UART 16550
serial ports
|
|
|
| |
| |
| Height |
|
| Width |
|
| Depth |
|
| Gross
Weight |
|
| Available
Colors |
|
| |
| |
| Buttons |
- Power
On/Off button
- UID
button
|
| LEDs |
- Power
LED
- Hard
drive activity
LED
- 2x
Network activity
LEDs
- System
Overheat / Fan
Fail LED
- UID
LED
|
| Ports |
|
| |
| |
| Hot-swap |
- 4x
1" Hot-swap
SAS / SATA drive
bays
|
| |
| |
| 1x
1U SAS / SATA Hard
Drive Backplane |
| |
| |
| 700W
Hot-swap AC power supply
w/ PFC |
| AC
Voltage |
- 100
- 240V, 60-50Hz,
10-5 Amp
|
| +5V |
|
| +5V
standby |
|
| +12V |
|
| -12V |
|
| +3.3V |
|
| |
| |
| CPU |
- Monitors
for CPU Cores,
+1.8V, +3.3V, +5V, ±12V,
+3.3V Standby & VBAT
- CPU
Core 4-Phase-switching
voltage regulator
with auto-sense
|
| FAN |
- Total
of five proprietary
fan connectors
supporting 10 fans
- 10x
fans with Tachometer
status monitoring
- Status
monitor for speed
control
|
| Temperature |
- Monitoring
for CPU, chassis
environment
- CPU
thermal trip support
- Thermal
control for 10x
fan connectors
- Thermal
Monitor 2 (TM2)
support
|
| LED |
- CPU
/ System Overheat
LED
|
| Other
Features |
- Chassis
intrusion detection
- Chassis
intrusion header
- SDDC
support
|
| |
| |
| BIOS
Type |
- 8Mb
Flash EEPROM with
Phoenix® BIOS
|
| BIOS
Features |
- Plug
and Play (PnP)
- SMBIOS
2.3
- APM
1.2
- DMI
2.3
- PCI
2.2
- ACPI
1.0
- USB
Keyboard support
- Fan
Speed Control
|
|
