6014H-XI

 
 
Motherboard
 

Super X6DHR-XiG
 
Processor/Cache
 
CPU
  • Dual 604-pin FC-mPGA4 Sockets
  • Supports up to two Intel® 64-bit Xeon™ processor(s) of the same type below:
    • Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
    • Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
    • Xeon LV (Low Voltage) CPU, up to 2.8 GHz
System Bus
  • 800 MHz system bus
Operating System Software
 
System Memory
 
Memory Capacity
  • Eight 184-pin DIMM sockets
  • Supports up to 16 GB DDR 333 MHz memory or
  • Supports up to 32 GB DDR 266 MHz memory
  • Dual-channel memory bus
  • Memory must be populated in pairs
  • Single-rank modules are recommended for 6+ DIMM support
Memory Type
  • DDR333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1GB, 2GB, 4GB**
Memory Voltage
  • 2.5 V only
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 Single Device Data Correction (SDDC)
 
On-Board Devices
 
Chipset
  • Intel® E7520 chipset
  • MCH + ICH5R + PXH +82546GB
SATA
  • ICH5R SATA Controller
  • RAID 0, 1, JBOD support
IPMI
  • Support for Intelligent Platform Management Interface v.2.0 (Optional)
Network Controllers
  • Intel® 82546GB Dual Port Gigabit Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics
  • ATI Rage XL SVGA PCI video controller with 8 MB of video memory
Super I/O
  • Winbond 83627HF chip
 
Expansion Slots
 
PCI-X
  • 2 x 64-bit PCI-X 133MHz slot
 
Input / Output
 
Serial ATA
  • Two Serial ATA ports
  • Two SATA hard drives supported
IDE
  • Dual EIDE channels support up to four UDMA IDE devices
  • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy
  • 1 Floppy controller; 1.44 MB, 2.88 MB
LAN
  • 2x RJ45 LAN port
USB
  • 2x USB rear ports
  • 2x USB internal headers (front)
  • USB 2.0 / 1.1 Compliant
VGA
  • 1x VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 2 Fast UART 16550 serial ports
 
 
Chassis
 
Form Factor
  • 1U Rackmount
Model
  • SC812i-420
 
Dimensions
 
Height
  • 1.7" (43mm)
Width
  • 16.8" (426mm)
Depth
  • 25.6" (650mm)
Gross Weight
  • 38 lbs (17.2kg)
Available Colors
  • Beige, Black
 
Front Panel
 
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
Ports
  • 2x USB Ports (USB 2.0 Ready)
  • 1x RJ45 COM Port
 
Drive Bays
 
Internal Bay
  • 3 x 3.5" Internal Drive Bays
 
Peripheral Drives
 
Floppy
  • Mitsumi 3.5" 1.44MB Slim Floppy Drive
CD-ROM
  • TEAC Slim 24x CD-ROM drive
 
System Cooling
 
Fans
  • 2x 10cm blower fans
 
Power Supply
 
420W AC power supply w/ PFC
[ 20-pin, (4-pin, 8-pin) = 12V ]
AC Voltage
  • 100 - 240V, 50/60Hz, 7-4 Amp
DC Output
  • 5V + 3.3V ≤ 120W
  • 12V Total ≤ 32 Amp
+5V
  • 20.0 amp
+5V standby
  • 2.0 amp
+12V1
  • 15.0amp
+12V2
  • 15.0amp
+12V3
  • 18.0amp
-12V
  • 1.0 amp
+3.3V
  • 20.0 amp
 
PC Health Monitoring
 
CPU
  • Monitors for CPU Cores, +3.3V, +5V, ±12V & +5V Standby
  • CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6V
  • Adjustable CPU clock frequency ratio settings (via BIOS)
FAN
  • Total of five 3-pin fan headers
  • 5x fans with status monitoring
  • Status monitor with firmware/software on/off control
  • Fan speed control
Temperature
  • Monitoring for CPU, chassis, environment
  • CPU thermal trip support
  • Thermal Monitor 2 support
LED
  • CPU Overheat LED
  • System Overheat LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC support
 
System BIOS
 
BIOS Type
  • 8Mb Flash EEPROM with Phoenix® BIOS
BIOS Features
  • Plug and Play (PnP)
  • SMBIOS 2.3
  • APM 1.2
  • DMI 2.1
  • ACPI 1.0
  • Fan Speed Control