6014H-32

 
 
Motherboard
 

Super X6DHR-3G2
 
Processor/Cache
 
CPU
  • Dual 604-pin FC-mPGA4 Sockets
  • Supports up to two Intel® 64-bit Xeon™ processor(s) of the same type below:
    • Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
    • Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transferu m Cache, up to 3.60 GHz
    • Xeon LV (Low Voltage) CPU, up to 2.8 GHz
System Bus
  • 800 MHz system bus
Operating System Software
  • Supports 64-bit Operating Systems
  • Supports 32-bit Operating Systems
 
System Memory
 
Memory Capacity
  • Eight 240-pin DIMM sockets
  • Supports up to 16 GB DDRII 400MHz memory
  • Dual-channel memory bus
  • Memory must be populated in pairs
  • Single-rank modules are recommended for 6+ DIMM support
Memory Type
  • DDRII 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1GB, 2GB
Memory Voltage
  • 1.8 V only
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 Single Device Data Correction (SDDC)
 
On-Board Devices
 
Chipset
  • Intel® E7520 chipset
  • MCH + ICH5R + PXH +82546GB
SATA
  • ICH5R SATA 2-port Controller
  • RAID 0, 1, JBOD support
SAS
  • Adaptec AIC9410: Adaptec 8-port SAS Controller
  • RAID 0, 1, JBOD support
IPMI
Network Controllers
  • Intel® 82546GB Dual Port Gigabit Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics
  • ATI Rage XL SVGA PCI video controller with 8 MB of video memory
Super I/O
  • Winbond 83627HF chip
 
Expansion Slots
 
PCI-Express / PCI-X
  • 2 x Universal (SXB-E) slots
    [1x PCI-X 133MHz & PCI-X 100MHz]
    OR
    [2x PCI-E (x8)
    (Riser cards CSE-RR1U-EL & CSE-RR1U-ELP required)]
 
Input / Output
 
SAS
  • Two SAS ports (1 internal, 1 external)
  • Each SAS port supports up to 4 SAS / SATA drives for a total of up to 8 SAS or SATA hard drives
IDE
  • Dual EIDE channels support up to four UDMA IDE devices
  • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy
  • 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
LAN
  • 2x RJ45 LAN port
USB
  • 2x USB rear ports
  • 2x USB internal headers
  • USB 2.0 Compliant / 1.1 Compliant
VGA
  • 1x VGA port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 2 Fast UART 16550 serial ports
 
 
Chassis
 
Form Factor
  • 1U Rackmount
Model
  • SC813T-500
 
Dimensions
 
Height
  • 1.7" (43mm)
Width
  • 17.2" (438mm)
Depth
  • 25.6" (650mm)
Gross Weight
  • 38 lbs (17.2kg)
Available Colors
  • Beige, Black
 
Front Panel
 
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat / Fan Fail LED
Ports
  • 2x USB & DB9 COM port tray
  • (Optional - in place of floppy drive)
 
Drive Bays
 
Hot-swap
  • 4x 1" Hot-swap SAS drive bays
 
Peripheral Drives
 
Floppy
  • TEAC 3.5" 1.44MB Slim Floppy Drive
CD-ROM
  • TEAC Slim 24x CD-ROM drive
 
SAS Backplane
 
1x 1U SAS Hard Drive Backplane
 
System Cooling
 
Fans
  • 2x 10cm blower fans
 
Power Supply
 
Cold-swappable 500W AC power supply module with PFC
[ 20-pin, (4-pin, 8-pin = 12V) ]
AC Voltage
  • 100 - 240V, 60-50Hz, 10 Amp Max
DC Output
  • 5V + 3.3V ≤ 160W
+5V
  • 30.0 Amp
+5V standby
  • 2.0 Amp
+12V
  • 39.0 Amp
-12V
  • 1.0 Amp
+3.3V
  • 21.0 Amp
 
PC Health Monitoring
 
CPU
  • Monitors for CPU Cores, +3.3V, +5V, ±12V & +5V Standby
  • CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V - 1.6V
  • Adjustable CPU clock frequency ratio settings (via BIOS)
FAN
  • Total of five 3-pin fan headers
  • 5x fans with status monitoring
  • Fan speed control
Temperature
  • Monitoring for CPU, chassis, environment
  • CPU thermal trip support
  • Thermal Monitor 2 support
LED
  • CPU Overheat LED
  • System Overheat LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC support
 
System BIOS
 
BIOS Type
  • 8Mb Flash EEPROM with Phoenix® BIOS
BIOS Features
  • Plug and Play (PnP)
  • SMBIOS 2.3
  • APM 1.2
  • DMI 2.1
  • ACPI 1.0
  • Fan Speed Control