| |
| |
| CPU |
|
• Dual mPGA604 ZIF Sockets
• Supports up to two Intel® Xeon™ processor(s) with 1MB of integrated Advanced Transfer Cache up to 3.20GHz |
| |
| System Bus |
|
533MHz/400MHz system bus |
| |
| |
| |
| Memory Capacity |
|
• Eight 184-pin DIMM sockets
• Supports up to 16 GB DDR266/200 memory
• Dual channel memory bus
• Memory must be populated in pairs |
| |
| Memory Type |
|
DDR266/200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs |
| |
| |
| |
| Chipset |
|
• Intel® E7501 chipset
• MCH + ICH3-S + P64H2 |
| |
| SCSI |
|
• Adaptec AIC-7902 Controller
• Dual-Channel Ultra320 SCSI |
| |
| RAID |
|
Support for Zero-Channel RAID w/ Adaptec 2010S ZCR Card (Card NOT included) |
| |
| IPMI |
|
Support for Intelligent Platform Management Interface v.1.5 (Optional) |
| |
| Network Controllers |
|
• Dual Intel® 82546EB Gigabit Ethernet
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| |
| Graphics |
|
ATI Rage XL SVGA PCI video controller with 8 MB of video memory |
| |
| |
| |
| PCI |
|
• Max 2x 64-bit 133MHz PCI-X (3.3V) slots
Default:
• 3x 64-bit 100/66MHz PCI-X (3.3V) slot
• 3x 64-bit 66MHz PCI-X (3.3V) slots
• 1x VXB (Virtual Extended Bus) slot |
| |
| IDE |
|
• Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| |
| USB |
|
2 USB ports |
| |
| Serial Ports |
|
2 Fast UART 16550 serial ports |
| |
| Parallel Port |
|
1 ECP/EEP parallel port |
| |
| Floppy |
|
1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
| |
| Keyboard / Mouse |
|
PS/2 keyboard and mouse ports |
| |
| |
| |
| BIOS Type |
|
4Mb Flash EEPROM with Phoenix® BIOS |
| |
| BIOS Features |
|
• Plug and Play (PnP)
• SMBIOS 2.3
• APM 1.2
• DMI 2.1
• ACPI 1.0
• BIOS rescue hot keys
• Hardware BIOS virus protection |
| |
|
|
| |
| |
| Form Factor |
|
• 4U Rackmountable Tower
• Optional Rackmount Kit (CSE-PT26) |
| |
| Model |
|
SC942S-600 |
| |
| |
| |
| Height |
|
7.0" (177mm) |
| |
| Width |
|
17.1" (434mm) |
| |
| Depth |
|
24.6" (625mm) |
| |
| Gross Weight |
|
69 lbs (31.4kg) |
| |
| Available Colors |
|
Beige, Black |
| |
| |
| |
| Buttons |
|
• Power On/Off button
• System Reset button |
| |
| LEDs |
|
• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
• Power Fail LED |
| |
| |
| |
| Hot-swap |
|
• 10x 1" SCA Ultra320/160 Hot-swap Drives
• 2x M35S Mobile Racks |
| |
| Peripheral Bay(s) |
|
• 2x 5.25" Peripheral Drive Bay
• 1x 5.25" Bay For Floppy Drive |
| |
| |
| |
| 2x SCAM942 Ultra320/160 Backplanes in 2 Mobile Racks (with SAF-TE) |
| |
| |
| |
| Fans |
|
• 3x 120mm Hot-swappable Fans
• 1x 120mm Rear Exhaust Fan |
| |
| |
| |
| 600W Triple-redundant AC power supply with PFC |
| AC Voltage |
- 100 - 240V, 50/60Hz, 12 Amp
|
| DC Output |
|
| +5V |
|
| +5V standby |
|
| -5V |
|
| +12V |
|
| -12V |
|
| +3.3V |
|
| |
| |
| CPU |
|
• Monitors for CPU Cores, +1.8V, +3.3V, +5, ±12V, 3.3V Standby
• CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 1.4V-3.5V
• Adjustable CPU clock frequency ratio settings (via BIOS) |
| |
| FAN |
|
• Total of seven 3-pin fan headers
• 3x fans with tachometer monitoring
• Overheat backup fan connector
• Status monitor with firmware/software on/off control |
| |
| Temperature |
|
• Monitoring for CPU, chassis, environment
• CPU thermal trip support |
| |
| LED |
|
• CPU Overheat LED
• System Overheat LED
• Suspend-state indicator LED |
| |
| Other Features |
|
• Chassis intrusion detection (through LDCM)
• Chassis intrusion header
• Chipkill support |
| |
|
