7043M-6


 
Key Features
1. Dual Intel® Xeon™ Support up to 3.06 GHz
2. Up to 12GB DDR 266/200 SDRAM
3. 3x 64-bit, 3x 32-bit PCI-X expansion
    slots
4. 1x Gigabit, 1x 10/100 Ethernet Port
5. Zero Channel RAID Support
6. 7 x 1" hot-swap Ultra160 SCSI
    Drive Bays
7. 450W Power Supply with
    Redundant Cooling Feature

 
 


 
Motherboard
 

Super X5DMS-6GM
 
 
Processor/Cache
 
CPU   • Dual mPGA604 ZIF Sockets
• Supports up to two Intel® Xeon™ processor(s) with 512KB of integrated Advanced Transfer Cache up to 3.06GHz
 
System Bus   533MHz/400MHz system bus
 
 
System Memory
 
Memory Capacity   • Six 184-pin DIMM sockets
• Supports up to 12 GB DDR266/200 memory
• Dual channel memory bus
• Memory must be populated in pairs
 
Memory Type   DDR266/200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
 
 
On-Board Devices
 
Chipset   • Intel® E7501 chipset
• MCH + ICH3-S + P64H2
 
SCSI   Adaptec AIC-7899W Controller for Dual-Channel Ultra160 SCSI (only Single-channel w/ Backplane)
 
RAID   Support for Zero-Channel RAID w/ Adaptec 2000S ZCR Card (Card NOT included)
 
IPMI   Support for Intelligent Platform Management Interface v.1.5 (Optional)
 
Network Controllers   • 1x Intel® 82545EM Gigabit Ethernet
• 1x Intel® 82551 10/100M Ethernet
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
 
Graphics   ATI Rage XL SVGA PCI video controller with 8 MB of video memory
 
 
Input / Output
 
PCI Expansion   • 1x 64-bit 133/100/66MHz PCI-X (3.3V) slot
• 2x 64-bit 66MHz PCI-X (3.3V) slots
• 3x 32-bit 33MHz PCI-X (5V) slots
• 1x VXB (Virtual Extended Bus) slot
 
IDE   • Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100
 
USB   Up to 5 USB ports
 
Serial Ports   2 Fast UART 16550 serial ports
 
Parallel Port   1 ECP/EEP parallel port
 
Floppy   1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
 
Keyboard / Mouse   PS/2 keyboard and mouse ports
 
 
System BIOS
 
BIOS Type   4Mb Flash EEPROM with Phoenix® BIOS
 
BIOS Features   • Plug and Play (PnP)
• SMBIOS 2.3
• APM 1.2
• DMI 2.1
• ACPI 1.0
• BIOS rescue hot keys
• Hardware BIOS virus protection
 
 
 
Chassis
 
Form Factor   • 4U Rackmountable Tower
• Optional Rackmount Kit (CSE-PT26)
 
Model   SC742S-450
 
 
Dimensions
 
Height   7.0" (177mm)
 
Width   17.1" (434mm)
 
Depth   24.4" (620mm)
 
Gross Weight   49 lbs (22.3kg)
 
Available Colors   Beige, Black
 
 
Front Panel
 
Buttons   • Power On/Off button
• System Reset button
 
LEDs   • Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
• Power Fail LED
 
 
Drive Bays
 
Hot-swap   • 7x 1" SCA Ultra320/160 Hot-swap Drives
 
Peripheral Bay(s)   • 3x 5.25" Peripheral Drive Bay
• 1x 5.25" Bay For Floppy Drive
 
 
SCSI Backplane
 
Single Channel SCSI Backplane w/o SAF-TE
 
 
System Cooling
 
Fans   • 2x 90mm Hot-swappable Fans
• 1x 120mm Rear Exhaust Fan
 
 
Power Supply
 
450W AC power supply (w/ PFC) with Redundant Cooling Feature
 
AC Voltage   • 100 - 240V, 50/60Hz, 10 Amp
 
DC Output   • 5V + 3.3V ≤ 160W
• 12V + 5V + 3.3V ≤ 430W
 
+5V   26.0 amp
 
+5V standby   2.0 amp
 
-5V   0.5 Amp
 
+12V   30.0amp
 
-12V   1.0 amp
 
+3.3V   30.0 amp
 
 
PC Health Monitoring
 
CPU   • Monitors for CPU Cores, +1.8V, +3.3V, +5, ±12V, 3.3V Standby
• CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 1.4V-3.5V
• Adjustable CPU clock frequency ratio settings (via BIOS)
 
FAN   • Total of six 3-pin fan headers
• 4x fans with tachometer monitoring
• Overheat backup fan connector
• Status monitor with firmware/software on/off control
 
Temperature   • Monitoring for CPU, chassis, environment
• CPU thermal trip support
 
LED   • CPU Overheat LED
• System Overheat LED
• Suspend-state indicator LED
 
Other Features   • Chassis intrusion detection (through LDCM)
• Chassis intrusion header
• Chipkill support