7044H-X8R

 
Key Features
1. Dual Intel® 64-bit Xeon™ Support
   up to 3.60 GHz
2. Up to 16GB DDRII-400 SDRAM
3. 1 (x8) PCI-Express on (x16) Slot,
    3 x 64-bit 133MHz PCI-X,
    2 x 64-bit 100MHz PCI-X
4. Intel® 82546GB Dual-port Gigabit
    Ethernet Controller
5. Zero Channel RAID Support
6. 8 x 1" hot-swap Ultra320 SCSI Drive
    Bays
7. Triple-Redundant 760W power supply
    with I2C For Remote Management
8. Tower or Rackmount

 
 


 
Motherboard
 

Super X6DH8-XG2
 
Processor/Cache
 
CPU
  • Dual 604-pin FC-mPGA4 Sockets
  • Supports up to two Intel® 64-bit Xeon™ processor(s) of the same type below:
    • Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
    • Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
    • Xeon LV (Low Voltage) CPU, up to 2.8 GHz
System Bus
  • 800 MHz system bus
Operating System Software
  • Supports 64-bit Operating Systems
  • Supports 32-bit Operating Systems
  • OS Compatibility Chart
 
System Memory
 
Memory Capacity
  • Eight 240-pin DIMM sockets
  • Supports up to 16 GB DDRII-400 memory
  • Dual channel memory bus
  • Memory must be populated in pairs
  • Single-rank modules are recommended for 6+ DIMM support
Memory Type
  • DDRII 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1GB, 2GB
Memory Voltage
  • 1.8 V only
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 Single Device Data Correction (SDDC)
 
On-Board Devices
 
Chipset
  • Intel® E7520 chipset
  • MCH + ICH5R + PXH +82546GB
SCSI
  • Adaptec AIC-7902 Controller
  • Dual-Channel Ultra320 SCSI
  • Host RAID 0, 1, 10, JBOD support
RAID
  • Support for Zero-Channel RAID with Adaptec 2010S ZCR Card
  • (Card NOT included)
IPMI
  • Support for Intelligent Platform Management Interface v.2.0 (Optional: AOC-IPMI20-E)
Network Controllers
  • Intel® 82546GB Dual Port Gigabit Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics
  • ATI Rage XL SVGA PCI video controller with 8 MB of video memory
Super I/O
  • National 87427 chip
 
Input / Output
 
IDE
  • Dual EIDE channels support up to four UDMA IDE devices
  • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy
  • 1 Floppy controller; 1.44 MB, 2.88 MB
LAN
  • 2x RJ45 LAN port
USB
  • 2x USB rear ports
  • 3x USB internal headers
  • USB 2.0 Compliant / 1.1 Compliant
VGA
  • 1x VGA Port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Ports
  • 2 Fast UART 16550 serial ports
 
System BIOS
 
BIOS Type
  • 8Mb Flash EEPROM with Phoenix® BIOS
BIOS Features
  • Plug and Play (PnP)
  • SMBIOS 2.3
  • APM 1.2
  • DMI 2.1
  • ACPI 1.0
  • Fan Speed Control
 
 
Chassis
 
Form Factor
  • 4U Rackmountable / Tower
  • Optional Rackmount Kit (CSE-PT26)
Model
  • SC743S1-R760
 
Dimensions
 
Height
  • 7.0" (177mm)
Width
  • 17.1" (434mm)
Depth
  • 25.5" (647mm)
Gross Weight
  • 69.5 lbs (31.5kg)
Available Colors
  • Beige, Black
 
Front Panel
 
Buttons
  • Power On/Off button
  • System Reset button
LEDs
  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED
  • Power Fail LED
Ports
  • 2x USB Ports
 
Expansion Slots
 
PCI-Express
  • 1 (x8) on a (x16) slot
PCI-X
  • 3x 64-bit 133MHz PCI-X (3.3V) slot
  • 2x 64-bit 100MHz PCI-X (3.3V) slots
 
Drive Bays
 
Hot-swap
  • 8x 1" SCA Ultra320/160 Hot-swap Drives
Peripheral Bay(s) [90o Rotatable]
  • 2x 5.25" Peripheral Drive Bay
  • 1x 5.25" Bay For Floppy Drive
 
SCSI Backplane
 
Single Channel SCSI Backplane w/ SAF-TE
 
System Cooling
 
Fans
  • 4x 5000 RPM Hot-swappable Cooling Fans
  • 2x 5000 RPM Rear Exhaust Fan
 
Power Supply
 
760W Triple-redundant AC power supply w/ PFC
[ 24-pin, (4-pin, 8-pin) = 12V ]
AC Voltage
  • 100 - 240V, 50/60Hz, 14-8 Amp
DC Output
  • 5V + 3.3V ≤ 200W
  • 12V Total ≤ 50A
+5V
  • 36.0 amp
+5V standby
  • 3.5 amp
+12V1
  • 18.0 amp
+12V2
  • 18.0 amp
+12V3
  • 19.0 amp
+12V4
  • 19.0 amp
-12V
  • 1.0 amp
+3.3V
  • 36.0 amp
 
PC Health Monitoring
 
CPU
  • Monitors for CPU Cores, +3.3V, +5V, ±12V & +5V Standby
  • CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.83V-0.63V
  • Adjustable CPU clock frequency ratio settings (via BIOS)
FAN
  • Total of four 4-pin and four 3-pin fan headers
  • 8x fans with status monitoring
  • Status monitor with firmware/software on/off control
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connector
Temperature
  • Monitoring for CPU, chassis, environment
  • CPU thermal trip support
  • Thermal Monitor 2 support
LED
  • CPU Overheat LED
  • System Overheat LED
  • Suspend-state indicator LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
  • SDDC