| |
| |
| CPU |
- Dual 604-pin FC-mPGA4 Sockets
- Supports up to two Intel® 64-bit Xeon™ processor(s) of the same type below:
- Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
- Xeon LV (Low Voltage) CPU, up to 2.8 GHz
|
| System Bus |
|
| Operating System Software |
- Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems
|
| |
| |
| Memory Capacity |
- Eight 240-pin DIMM sockets
- Supports up to 16 GB DDRII 400MHz memory
- Dual channel memory bus
- Memory must be populated in pairs
- Single-rank modules are recommended for 6+ DIMM support
|
| Memory Type |
- DDRII 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 Single Device Data Correction (SDDC)
|
| |
| |
| Chipset |
- Intel® E7520 chipset
- MCH + 6300ESB + PXH/V + 82541PI
|
| SAS |
- Adaptec AIC9410: Adaptec 8-port
SAS Controller
- RAID 0, 1, JBOD support
|
| SATA |
- 6300ESB 2-port SATA Controller
|
| SAS ZCR |
- Supermicro All-In-One ZCR card: AOC-LPZCR1
- (Optional Card)
- RAID 0, 1, 5, 10, and JBOD support
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- (Optional: AOC-IPMI20-E)
|
| Network Controllers |
- Dual Intel® 82541PI Single-Port Gigabit Controller
|
| Graphics |
- ATI Rage XL SVGA PCI video controller with 8 MB of video memory
|
| Super I/O |
|
| |
| |
| IDE |
- Dual EIDE channels support up to four UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| Floppy |
- 1 Floppy controller; 1.44 MB, 2.88 MB
|
| LAN |
|
| USB |
- 2x USB rear ports
- 3x USB internal headers
- USB 2.0 Compliant / 1.1 Compliant
|
| VGA |
|
| Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
| Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
|
| Parallel Port |
|
| |
| |
| BIOS Type |
- 8Mb Flash EEPROM with Phoenix® BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- SMBIOS 2.3
- APM 1.2
- DMI 2.1
- ACPI 1.0
- Fan Speed Control
|
|
|
| |
| |
| Form Factor |
- 4U Rackmountable / Tower
- Optional Rackmount Kit (CSE-PT26)
|
| Model |
|
| |
| |
| Height |
|
| Width |
|
| Depth |
|
| Gross Weight |
|
| Available Colors |
|
| |
| |
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Power Fail LED
- Power Fail LED
|
| Ports |
|
| |
| |
| PCI-Express |
|
| PCI-X |
- 1x 64-bit 133MHz PCI-X (3.3V) slot
- 2x 64-bit 100MHz PCI-X (3.3V) slots
|
| PCI |
|
| |
| |
| Hot-swap |
- 8x 1" SAS / SATA Hot-swap Drive Bays
|
| Peripheral Bay(s) |
- 2x 5.25" Peripheral Drive Bay
- 1x 5.25" Bay For Floppy Drive
|
| |
| |
| Fans |
- 4x 5000 RPM Hot-Swappable Cooling Fans
- 2x 5000 RPM Hot-Swappable Rear Exhaust Fan
|
| Shroud |
- 1x Air Shroud for 1U Chassis
|
| |
| |
760W Triple-Redundant AC power supply with PFC
[ 24-pin, (8-pin, 4-pin)=12V ] |
| AC Voltage |
- 100 - 240V, 50-60Hz, 14 Amp Max
|
| DC Output |
|
| +5V |
|
| +5V standby |
|
| +12V |
|
| -12V |
|
| +3.3V |
|
| |
| |
| CPU |
- Monitors for CPU Cores, CPU0, CPU1, +3.3V, +5V, ±12V
|
| FAN |
- Total of four 4-pin fan headers and four 3-pin fan headers
- 8x fans with tachometer status monitoring
- Low noise fan speed control
|
| Temperature |
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
|
| Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|
