| |
| |
| CPU |
|
• Dual mPGA603 ZIF Sockets
• Supports up to two Intel® Xeon™ processor(s) with 512KB of integrated Advanced Transfer Cache up to 3.0GHz |
| |
| System Bus |
|
400MHz system bus |
| |
| |
| |
| Memory Capacity |
|
• Eight 184-pin DIMM sockets
• Supports up to 16 GB DDR200 memory
• Dual channel memory bus
• Memory must be populated in pairs |
| |
| Memory Type |
|
DDR266/200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs |
| |
| |
| |
| Chipset |
|
• Intel® E7500 chipset
• MCH + ICH3-S + P64H2 |
| |
| SCSI |
|
• Adaptec AIC-7899W Controller
• Dual-Channel Ultra160 SCSI |
| |
| RAID |
|
Support for Zero-Channel RAID w/ Adaptec 2000S ZCR Card (Card NOT included) |
| |
| IPMI |
|
Support for Intelligent Platform Management Interface v.1.5 (Optional) |
| |
| Network Controllers |
|
• Dual Intel® 82550 10/100 Ethernet
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| |
| Graphics |
|
ATI Rage XL SVGA PCI video controller with 8 MB of video memory |
| |
| |
| |
| 6x low-profile full-length 64-bit PCI-X expansion slots |
| |
| |
| |
| PCI Expansion |
|
• Max 2x 64-bit 133MHz PCI-X (3.3V) slots
Default:
• 2x 64-bit 100/66MHz PCI-X (3.3V) slot
• 4x 64-bit 66MHz PCI-X (3.3V) slots
• 1x VXB (Virtual Extended Bus) slot |
| |
| IDE |
|
• Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| |
| USB |
|
Up to 5 USB ports |
| |
| Serial Ports |
|
2 Fast UART 16550 serial ports |
| |
| Parallel Port |
|
1 ECP/EEP parallel port |
| |
| Floppy |
|
1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
| |
| Keyboard / Mouse |
|
PS/2 keyboard and mouse ports |
| |
| |
| |
| BIOS Type |
|
4Mb Flash EEPROM with Phoenix® BIOS |
| |
| BIOS Features |
|
• Plug and Play (PnP)
• SMBIOS 2.3
• APM 1.2
• DMI 2.1
• ACPI 1.0
• BIOS rescue hot keys
• Hardware BIOS virus protection |
| |
|
|
| |
| |
| Form Factor |
|
2U Rackmount |
| |
| Model |
|
SC822S-400LP |
| |
| |
| |
| Height |
|
3.5" (89mm) |
| |
| Width |
|
16.8" (426mm) |
| |
| Depth |
|
25.6" (650mm) |
| |
| Gross Weight |
|
49 lbs (22.3kg) |
| |
| Available Colors |
|
Beige, Black |
| |
| |
| |
| Buttons |
|
• Power On/Off button
• System Reset button |
| |
| LEDs |
|
• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED |
| |
| |
| |
| Hot-swap |
|
6x 1" SCA Ultra160 Hot-swap drives |
| |
| Peripheral Bay(s) |
|
1x 5.25" full-height peripheral bay |
| |
| |
| |
| 1x Single-Channel 2U SCA Ultra160 backplane (w/o SAF-TE) |
| |
| |
| |
| 2U 400W AC power supply w/ PFC |
| |
| AC Voltage |
|
• 100 - 240V, 50/60Hz, 7 Amp |
| |
| DC Output |
|
&• 12V + 5V + 3.3V ≤ 385W |
| |
| +5V |
|
33.0 amp |
| |
| +5V standby |
|
2.0 amp |
| |
| -5V |
|
0.8 amp |
| |
| +12V |
|
25.0amp |
| |
| -12V |
|
1.0 amp |
| |
| +3.3V |
|
28.0 amp |
| |
| |
| |
| CPU |
|
• Monitors for CPU Cores, +1.8V, +3.3V, +5, ±12V, 3.3V Standby
• CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 1.4V-3.5V
• Adjustable CPU clock frequency ratio settings (via BIOS) |
| |
| FAN |
|
• Total of seven 3-pin fan headers
• 4x fans with tachometer monitoring
• Overheat backup fan connector
• Status monitor with firmware/software on/off control |
| |
| Temperature |
|
• Monitoring for CPU, chassis, environment
• CPU thermal trip support |
| |
| LED |
|
• CPU Overheat LED
• System Overheat LED
• Suspend-state indicator LED |
| |
| Other Features |
|
• Chassis intrusion detection (through LDCM)
• Chassis intrusion header
• Chipkill support |
| |
|
