5025M-4


 
Key Features
1. 1. Intel® Pentium® D, Pentium® 4
    Extreme Edition, Pentium 4, Pentium
    Extreme Edition & Celeron D
    in LGA775 Package(FSB 1066/800/533)
2. Up to 8GB unbuffered, ECC / non-ECC
    DDRII 667/533/400 SDRAM
3. 1 (x4) PCI-Express
    2x 64-bit 133MHz PCI-X
    2x 64-bit 100MHz PCI-X
4. 1x Intel® 82573V (Tekoa) PCI-e Gigabit
    LAN Port
5. 6 x 1" Hot-swappable U320 SCSI Drive
    Bays
6. 400W Power Supply

 


Motherboard

Super PDSM4
 
Processor/Cache
CPU
  • Single LGA775 ZIF Socket
  • Supports an Intel® Pentium® D (Smithfield Dual Core) processor
  • Supports an Intel® Pentium® Extreme Edition processor
  • Supports an Intel® Pentium® 4 (Prescott) processor
  • Supports an Intel® Pentium® 4 Extreme Edition processor
  • Supports an Intel® Celeron® D processor
  • Hyper-Threading (HT) capable
  • 1MB L2 Cache
System Bus
  • 1066 / 800 / 533 MHz system bus
 
System Memory
Memory Capacity
  • Four 240-pin DIMM sockets
  • Supports up to 8 GB of unbuffered, ECC / non-ECC DDRII 667/533/400MHz memory (Single / Dual Channel)
Memory Type
  • DDRII 667/533/400MHz unbuffered, ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
DIMM Sizes
  • 256 MB, 512 MB, 1 GB, 2GB
Memory Voltage
  • 1.8 V only
 
On-Board Devices
Chipset
  • Intel E7230 (Mukilteo) chipset
  • ICH7R + PXH-V + Intel® 82573V
SATA
  • Intel® ICH7R SATA controller built-in
  • RAID 0, 1, 5, 10
SCSI
  • Adaptec AIC-7901
  • HostRAID 0, 1, 10 Supported
  • ZCR Support (Optional: AOC-LPZCR1 Card)
  • RAID 0, 1, 5, 10 supported with ZCR card
IPMI
  • 2U, 3U, 4U support for Intelligent Platform Management Interface v.2.0, Low Profile ( Optional: LPIPMI)
  • RMM (Remote Management Module)
  • (Card not included)
  • 3rd LAN Optional
Network Controllers
  • Dual-port Intel® 82573V Gigabit PCI-Express Ethernet (Tekoa)
  • Supports 1000BASE-T, RJ45 output
Graphics
  • On-board ATI Rage XL (8MB) graphics
Super I/O
  • Winbond 83627EHF chip
Clock Generator
  • CK410
 
Input / Output
SCSI
  • U320 Single Channel SCSI
  • Adaptec AIC-7901
IDE
  • One EIDE channel supports up to two UDMA IDE devices
  • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy
  • 1 Floppy controller; 1.44 MB
LAN
  • 2x RJ45 LAN port
USB
  • 6x USB 2.0 compliant / 1.1 compatible
  • 2 rear ports, 4 internal headers
  • 2 in front (FUCI), 2 in rear
VGA
  • 1x VGA port ( only)
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Port / Header
  • 1x Fast UART 16550 serial port
  • 1x header
Parallel Port
  • 1x ECP / EEP Parallel Port
 
System BIOS
BIOS Type
  • 8Mb Flash EEPROM with Phoenix BIOS®
BIOS Features
  • Plug and Play (PnP)
  • APM 1.2
  • DMI 2.3 support
  • PCI 2.2
  • ACPI 1.0
  • Hardware BIOS Virus protection
  • SMBIOS 2.3
  • USB Keyboard support
  • PCI-X 1.0
 
Chassis
Form Factor 2U Rackmount
Model SC822S-400LP
 
Dimensions
Height 3.5" (89mm)
Width 16.8" (426mm)
Depth 25.6" (650mm)
Gross Weight 49 lbs (22.3kg)
Available Colors Beige, Black
 
Front Panel
Buttons • Power On/Off button
• System Reset button
LEDs • Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat / Fan Fail LED
Ports N/A
 
Expansion Slots
PCI-Express
  • 1 (x4) PCI-e slot
PCI - X
  • 2x 64-bit 133MHz PCI-X (3.3V) slots
  • 2x 64-bit 100MHz PCI-X (3.3V) slots
 
Drive Bays
Hot-swap
  • 6x 1" SCA Ultra320/160 Hot-swap drives
Peripheral Bay(s)
  • 1x 5.25" full-height peripheral bay
 
SCSI Backplane
1x 2U SCA Ultra320/160 backplane (with SAF-TE)
 
Peripheral Drives
Floppy
  • Panasonic 3.5" 1.44MB Floppy Drive
CD-ROM
  • TEAC Slim 24x CD-ROM drive
 
System Cooling
Fans 4x 80mm 3400 RPM fans
 
Power Supply
2U 400W AC power supply with PFC
[ 24-pin, (8-pin, 4-pin)=12V) ]
AC Voltage
  • 100 - 240V, 47 - 63Hz, 7 Amp
DC Output
  • 12V + 5V + 3.3V ≤ 385W
+5V
  • 33.0 Amp
+5V standby
  • 2.0 Amp
-5V
  • 0.8 Amp
+12V
  • 25.0Amp
-12V
  • 1.0 Amp
+3.3V
  • 28.0 Amp
 
PC Health Monitoring
CPU
  • Monitors for CPU Cores (+1.8V, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT)
  • CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
  • Adjustable CPU clock frequency ratio settings (via BIOS)
FAN
  • Total of five 4-pin fan headers
  • 5x fans with tachometer monitoring
  • Status monitor with firmware / software speed control
  • Status monitor for on/off control
  • Support 3-pin fans (with speed control)
  • Low noise fan speed control
  • Pulse Width Modulated (PWM) fan connector
Temperature
  • Monitoring for CPU and chassis environment
  • CPU Thermal Trip support
  • Thermal Monitor (TM2) Support
LED
  • CPU / System Overheat LED
  • +5V standby alert LED
  • Suspend-state indicator LED
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header