| |
| |
| CPU |
|
• Dual mPGA700 ZIF Sockets
• Supports up to two Intel® Itanium® processor(s) with 9MB Integrated Advanced Transfer Cache up to 1.60GHz |
| |
| System Bus |
|
400MHz system bus |
| |
| |
| |
| Memory Capacity |
|
• Eight 184-pin DIMM sockets
• Supports up to 16 GB DDR200 memory
• 4-Way Interleaved Memory
• 4x Memory Modules must be populated at the same time |
| |
| Memory Type |
|
DDR200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs |
| |
| DIMM Sizes |
|
512 MB, 1 GB, 2 GB |
| |
| Memory Voltage |
|
2.5 V only |
| |
| |
| |
| Chipset |
|
• Intel® E8870 chipset
• SNC + SIOH + MRH_D + SPS + ICH4 + P64H2 |
| |
| IPMI |
|
Support for Intelligent Platform Management Interface v.1.5 (Optional) |
| |
| Network Controllers |
|
• 1x Intel® 82546EB Gigabit Ethernet
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| |
| Graphics |
|
ATI Rage XL SVGA PCI video controller with 8 MB of video memory |
| |
| |
| |
| 3x full-height, full-length 64-bit 133/100MHz PCI-X expansion slots (with Riser Card) |
| |
| |
| |
| PCI Expansion |
|
• 1x 64-bit 133/100/66MHz PCI-X (3.3V) slot |
| |
| IDE |
|
• Dual EIDE channels support up to four UDMA IDE devices
• Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| |
| USB |
|
Up to 6x USB 2.0 ports |
| |
| Serial Ports |
|
• 1x External Serial Port
• Internal header supporting 2x Fast UART 16550 serial ports |
| |
| |
| |
| BIOS Type |
|
6MB AMI® Flash BIOS (total of 6x BIOS Chips) |
| |
| BIOS Features |
|
• Plug and Play (PnP)
• SMBIOS 2.3
• PCI 2.2
• ACPI 1.0 (limited)
• Hardware BIOS virus protection |
| |
|
|
| |
| |
| Form Factor |
|
2U Rackmount |
| |
| Model |
|
SC823Hi-R500RC |
| |
| |
| |
| Height |
|
3.5" (89mm) |
| |
| Width |
|
16.8" (426mm) |
| |
| Depth |
|
25.6" (650mm) |
| |
| Gross Weight |
|
52 lbs (23.6kg) |
| |
| Available Colors |
|
Beige, Black |
| |
| |
| |
| Buttons |
|
• Power On/Off button
• System Reset button |
| |
| LEDs |
|
• Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
• Power fail LED |
| |
| Ports |
|
none |
| |
| |
| |
| Internal Bay(s) |
|
6 x 3.5" IDE Drive Bays |
| |
| Peripheral Bay(s) |
|
1x 5.25" full-height peripheral bay |
| |
| |
| |
| Fans |
|
4x 80mm 6300 RPM fans |
| |
| |
| |
Redundant 2U 500W AC power supply w/ PFC
[ 24-pin, (8-pin, 4-pin)=12V) ] |
| |
| AC Voltage |
|
• 100 - 240V, 50/60Hz, 8 Amp |
| |
| DC Output |
|
• 5V + 3.3V ≤ 200W |
| |
| +5V |
|
30.0 amp |
| |
| +5V standby |
|
2.0 amp |
| |
| -5V |
|
1.0 amp |
| |
| +12V |
|
39.0amp |
| |
| -12V |
|
0.5 amp |
| |
| +3.3V |
|
21.0 amp |
| |
| |
| |
| CPU |
|
• Monitors for CPU Cores, +1.8V, +3.3V, +5, ±12V, 3.3V Standby
• CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 1.1V-1.5V
• Auto-switching for VRMs |
| |
| FAN |
|
• Total of eight 3-pin fan headers
• 8x fans with tachometer monitoring
• Overheat backup fan connector
• Status monitor with firmware/software on/off control |
| |
| Temperature |
|
• Monitoring for CPU, chassis, environment
• CPU thermal trip support
• Thermal control for 8x fan connectors
• I2C temperature sensing logic |
| |
| LED |
|
• CPU Overheat LED
• System Overheat LED
• Suspend-state indicator LED |
| |
| Other Features |
|
• Chassis intrusion detection
• Chassis intrusion header |
| |
|
